Details for DDEntity "505 - Tramline Control Level"

505 - Tramline Control Level Request changes
DefinitionThis DDI defines the Tramline Control capability of the Implement.
CommentThe Implement shall provide in its root DeviceElement which Tramline Control Levels are supported. The Tramline Control Levels are independent of each other. It is allowed to support for example only Level 3 Tramlining. Byte 1 Bit 0 = 1 Support Tramline Control Level 1 Byte 1 Bit 1 = 1 Support Tramline Control Level 2 Byte 1 Bit 2 = 1 Support Tramline Control Level 3 Byte 1 Bit 3-7 = 0 Reserved
Typically used by Device Class(es) 4 - Planters /Seeders
Unit Symboln.a. - not applicable
Bit Resolution1
SAE SPN
CANBus Range0 to 7
Display Range0 to 7
Submit Date2015-12-10
Submit ByKarsten Helweg
Submit CompanyCompetence Center ISOBUS e.V.
Revision Number3
Current StatusISO-Published
Status Date2016-08-24
Status Comments
TramlineControl_BasicRequirementsV1_12-v1.pdf
1,252.76 KB Upload: 2019-12-16 20:03:53

2016-08-24: ISO-Published
2015-12-10: Request Pending

Back