Details for DDEntity "513 - Guidance Line Deviation"
513 - Guidance Line Deviation Request changes |
---|
Definition | Deviation of the Device-Reference-Point (DRP) to the actual guidance line, in driving direction. |
---|---|
Comment | This DDI shall be sent from the Guidance System or Task Controller. It specifies the Deviation in mm between the current Guidance Line and the Device Reference Point which is guided along the Guidance Line. The Guidance Line Deviation is positive when the Guidance Line is located on the right hand side of the Device Reference Point in driving direction. The Guidance Line Deviation is negative when the Guidance Line is located on the left hand side of Device Reference Point in driving direction. For more details see also attachment on DDI 505. |
Typically used by Device Class(es) |
1 -
Tractor 2 - Primary Soil Tillage 3 - Secondary Soil Tillage 4 - Planters /Seeders 5 - Fertilizer 6 - Sprayers 7 - Harvesters 8 - Root Harvester 9 - Forage harvester 10 - Irrigation 11 - Transport / Trailers 12 - Farmyard Work 13 - Powered Auxilary Units 14 - Special Crops 17 - Sensor System 25 - Slurry Applicators |
---|
Unit Symbol | mm - |
---|---|
Bit Resolution | 1 |
SAE SPN | |
CANBus Range | -2147483648 to 2147483647 |
Display Range | -2147483648 to 2147483647 |
Submit Date | 2015-12-10 |
Submit By | Karsten Helweg |
Submit Company | Competence Center ISOBUS e.V. |
Revision Number | 1 |
Current Status | ISO-Published |
Status Date | 2016-09-01 |
Status Comments |
|
|
2016-09-01: ISO-Published
2015-12-10: Request Pending
|