SPN | 9744 |
---|---|
SP Name | Auxiliary valve 12 estimated flow (high resolution) |
SP Description | Value reported by the controller of flow out of an auxiliary valve 12 of a tractor which could be based on the commanded position of the valve. If this parameter is “not available” (all 1’s) then only the original resolution parameters (see SPN 2337 and 2338) are populated. 0 % indicates no flow, 100 % indicates maximum flow out the extend port, −100 % indicates maximum flow out the retract port. Caution should be exercised when using this parameter in feedback control systems because this parameter is estimated and not measured. |
Sp Notes | Not set |
Has Attachment | no |
SP Historical Remarks | - |
SP Historical Attachment | no |
From 2015/2019 | 2018 |
SP Length | 16 bits |
Scaling | 0.004 %/bit |
Offset | -125 |
Data Range | -125 to 132.02 % |
Operational Range | -100 to 100 % |
Units | % |
Slot Identifier | 264 |
Slot Name | SAEpc09 |
SP Type | Estimated |
SP Reference | Not set |
Scale Factor (value only) | 0.004 |
Offset (value only) | -125 |
Range maximum (value only) | 132.02 |
Length minimum (value only) | 16 |
Length maximum (value only) | 16 |
SP Document | ISO 11783-7 |
PG Created or Modified Date | 2011-02-03 |
PG SP Mapping Created/Mod. Date | 2017-11-20 |