| PGN | 65090 |
|---|---|
| PG Label | Hitch and PTO commands |
| PG Acronym | HPTOC |
| PG Notes | Message that provides control of the hitch position, PTO shaft set point speed and PTO engagement. |
| Pgn Notes | - |
| EDP | 0 |
| DP | 0 |
| PF | 254 |
| PS | 66 |
| Multipacket | No |
| Transmission Rate | 100 ms when active |
| PG Data Length | 8 |
| Default Priority | 3 |
| PG Reference | Not set |
| Sp Start Bit | 7.7 |
| PG Document | ISO 11783-7 |
| PG Created or Modified Date | 2000-08-10 |
| PG SP Mapping Created/Mod. Date | 2000-08-10 |
Linked SPNs
Displaying 1-10 of 10 results.
| SPN | SP Name | SP Position In PG | SP Length | Scaling | Offset | |
|---|---|---|---|---|---|---|
| 1874 | Front hitch position — Command | 1 | 8 bits | 0.4 %/bit | 0 |  |
| 1875 | Rear hitch position — Command | 2 | 8 bits | 0.4 %/bit | 0 | |
| 1886 | Front PTO output shaft speed set point — Command | 3-4 | 16 bits | 0.125 1/min/bit | 0 | |
| 1887 | Rear PTO output shaft speed set point — Command | 5-6 | 16 bits | 0.125 1/min/bit | 0 | |
| 1894 | Rear PTO engagement — Command | 7.5 | 2 bits | 4 states/2 bit | 0 | |
| 1893 | Front PTO engagement — Command | 7.7 | 2 bits | 4 states/2 bit | 0 | |
| 1898 | Rear PTO economy mode — Command | 8.1 | 2 bits | 4 states/2 bit | 0 | |
| 1897 | Front PTO economy mode — Command | 8.3 | 2 bits | 4 states/2 bit | 0 | |
| 1896 | Rear PTO mode — Command | 8.5 | 2 bits | 4 states/2 bit | 0 | |
| 1895 | Front PTO mode — Command | 8.7 | 2 bits | 4 states/2 bit | 0 | |