| SPN | 1881 |
|---|---|
| SP Name | Rear Nominal Lower Link Force |
| SP Description | Measurement providing an indication of draft at the lower links of the rear three-point hitch. Nominal lower link force may be expected to be approximately linear with respect to draft and may be proportional to draft for a single hitch position. This measurement is typically obtained from a transducer on the lower hitch links and typically used as raw data in draft control. A positive value indicates the force applied to the tractor opposed to its heading. |
| Sp Notes | Not set |
| Has Attachment | no |
| SP Historical Remarks | - |
| SP Historical Attachment | no |
| From 2015/2019 | 2015 |
| SP Length | 8 bits |
| Scaling | 0.8 %/bit |
| Offset | -100 |
| Data Range | -100 to 100 % |
| Operational Range | Not set |
| Units | % |
| Slot Identifier | 128 |
| Slot Name | SAEpc04 |
| SP Type | Measured |
| SP Reference | Not set |
| Scale Factor (value only) | 0.8 |
| Offset (value only) | -100 |
| Range maximum (value only) | 100 |
| Length minimum (value only) | 8 |
| Length maximum (value only) | 8 |
| SP Document | ISO 11783-7 |
| PG Created or Modified Date | 2011-02-03 |
| PG SP Mapping Created/Mod. Date | 2000-08-10 |
