Addresses

To search a certain item enter you search-text into the input field and press return.
You may optionally enter a comparison operator (<, <=, >, >=, <> or =) at the beginning of each of your search values to specify how the comparison should be done.

Advanced Search
Displaying 101-200 of 258 results.
Industry GroupSource AddressNameNotes 
 
3229Laser TracerA device that receives a laser strike and reports the vertical and horizontal position.View
3225Lift Arm ControllerControls the lift arms and tilt functions on a construction loader, skid steer loader, or similar machine. Refers to the main elevation and tilt functions of the machine's lift arms but may not include the control of the attachment itself.View
 55Lighting - Operator Controls View
3228Loader ControlControls the hydraulic system of the loader attachment of a loader/backhoe, wheel loader, skid steer, or similar vehicleView
3227Main Controller - Skid Steer LoaderPrimary system controller for skid steer loaderView
 39Management Computer #1The first Management Computer - may only be used for the NAME Function of 30, Function Instance 0, and an ecu instance of 0.View
4242Marine Display #1The first Marine Display for an engine.View
4243Marine Display #2The second Marine Display for an engine.View
4244Marine Display #3The third Marine Display for an engine.View
4245Marine Display #4The fourth Marine Display for an engine.View
4246Marine Display #5The fifth Marine Display for an engine.View
4247Marine Display #6The sixth Marine Display for an engine.View
2245Non Virtual Terminal Display (Implement Bus)A non Virtual Terminal cab display connected to the implement busView
 254Null AddressThe NULL address is only for use within J1939-81 Network Management communications to indicate the Controller Application (CA) has not yet successfully claimed an address. The NULL address is only permitted in the Source Address field of the J1939 message identifier.View
 249Off Board Diagnostic-Service Tool #1The address for the first off board diagnostic service tool - may only be used for the NAME Function of 129, Industry Group 0, Function Instance 0, and an ECU instance of 0.View
 250Off Board Diagnostic-Service Tool #2The second preferred address available for use for the function “Off Board Diagnostic-Service Tool”. It should only be used by the “second” Off Board Diagnostic-Service Tool (Function 129, Industry Group 0, Function Instance 1, ECU Instance 0).View
 37Off Vehicle Gateway View
 63Oil Sensor View
1164On Board Diagnostic Unit #2Controller used to report On Board DiagnosticsView
 251On-Board Data Logger View
 43On-Board Diagnostic Unit View
2246Operator Controls - Machine SpecificNon auxiliary operator control inputs View
1206Other Trailer #1 DevicesRecommended address space for subnetwork devicesView
1207Other Trailer #1 DevicesRecommended address space for subnetwork devicesView
1198Other Trailer #2 DevicesRecommended address space for subnetwork devicesView
1199Other Trailer #2 DevicesRecommended address space for subnetwork devicesView
1190Other Trailer #3 DevicesRecommended address space for subnetwork devicesView
1191Other Trailer #3 DevicesRecommended address space for subnetwork devicesView
1182Other Trailer #4 DevicesRecommended address space for subnetwork devicesView
1183Other Trailer #4 DevicesRecommended address space for subnetwork devicesView
1174Other Trailer #5 DevicesRecommended address space for subnetwork devicesView
1175Other Trailer #5 DevicesRecommended address space for subnetwork devicesView
 80Parking brake controllerModule controlling the parking brakeView
 25Passenger-Operator Climate Control #1The first climate control - may only be used for the NAME Function of 21, Function Instance 0, and an ecu instance of 0, and must be associated with the driver (operator) climate control, when there are multiple climate control systems.View
 58Passenger-Operator Climate Control #2The second SA available for climate control - must be associated with the passenger climate control (NAME Function of 21, function instance 1, and an ecu instance of 0), when there are multiple climate control systems. If only one climate control system then may be used for the second ecu of the climate control (Function 21, Function Instance 0, ECU Instance of 1).View
 48Pneumatic - System Controller View
2239Position ControlMultiple axis position control of a devices movable device elementsView
 91Power Systems ManagerThis controller application will be used to manage one or more power systems. It might exist in an ECU with no other controller applications, or it might exist in an ECU with multiple controller applicationsView
 36Power TakeOff (Front or Secondary) View
 7Power TakeOff - (Main or Rear) View
 90Powertrain Control ModuleElectronic control module in charge of controlling and coordinating the operation of a hybrid propulsion system.View
2243Product Loss MonitoringMonitoring of the amount of produce being lost from e.g. a harvesting processView
2244Product Moisture SensingMonitoring of the produce moisture contentView
 73Propulsion Battery ChargerA device used to charge propulsion batteries in an electric vehicle from an off-board source of electrical energy.View
4228Propulsion Sensor Hub & Gateway #1The first device that interfaces with propulsion sensors and acts as a gateway to other networks in the system.View
4229Propulsion Sensor Hub & Gateway #2The second device that interfaces with propulsion sensors and acts as a gateway to other networks in the system.View
4230Propulsion Sensor Hub & Gateway #3The third device that interfaces with propulsion sensors and acts as a gateway to other networks in the system.View
4231Propulsion Sensor Hub & Gateway #4The fourth device that interfaces with propulsion sensors and acts as a gateway to other networks in the system.View
4237Protection System for Marine EnginesThe first ecu that controls the Protection functions on the first engine of a Marine System.View
 66Ramp ControlControl of ramps, lifts, or tailgatesView
 56Rear Axle Steering Controller #1 View
1165Rear Steering Axle Controller #2Rear steering controller 2 for axle groupView
1166Rear Steering Axle Controller #3Rear steering controller 3 for axle groupView
 252Reserved for Experimental Use View
 253Reserved for OEM View
 16Retarder - Driveline View
 15Retarder - EngineEngine Compression BrakingView
 41Retarder, Exhaust, Engine #1The first engine exhaust retarder - may only be used for the NAME Function of 12, Function Instance 0, and an ecu instance of 0.View
 44Retarder, Exhaust, Engine #2The second PA available for use for the function, engine exhaust retarder. It may be used by the “second” engine’s exhaust retarder (Function 12, Function Instance 1, ECU Instance 0), but in cases without a second engine it may also be used by the second exhaust retarder on the first engine or by the second ecu on the first exhaust retarder on the first engine (Function 12, Function Instance 0, ECU Instance 1).View
1159Roadway Information SystemController applications that use this source address will provide information relevant to the roadway in which the vehicle is traveling. This includes items such as intersections, grade, speed limit, number of lanes, location of fueling stations, etc. The roadway refers to the current road that the vehicle is traveling, nearby roads that may intersect the road, and possibly information for a specific route._x000D_ _x000D_ This is different from "Vehicle Navigation" (Source Address 28) because a vehicle navigation device may use the information provided by the device with the "Roadway Information" source address for its purposes. These functions could be accomplished by two completely different devices.View
3224Rotation SensorA device that measures the rotational angle around an axis.View
 83Safety Restraint SystemThe safety restraint system can be for controlling activation of airbags, belt tensioners, roll over protection systems, etc.View
 88Safety Restraint System #2The second safety restraint system that can be for controlling activation of airbags, belt tensioners, roll over protection systems, etc.View
 54Seat Control #1The first seat control module - may only be used for the NAME Function of 40, Function Instance 0, and an ecu instance of 0, and must be associated with the driver seat, when there are multiple seats with separate controls.View
 79Seat Control #2The second PA available for seat controls - must be associated with the passenger seat (NAME Function of 40, Function Instance 1, and an ecu instance of 0), when there are multiple seats with separate controls. If only one seat then may be used for the second ecu of the seat control (Function 40, Function Instance 0, ECU Instance of 1).View
2238Sequence ControllerThe master in the Sequence Control System as defined in ISO11783-14View
 5Shift Console - PrimaryThe shift console mounted in the normal drivers positionView
 6Shift Console - SecondaryA shift console mounted remotely from the normal drivers position (May not be used for any ecu instances of the primary shift console)View
3233Single Land Leveling System Operator InterfaceA component that allows the user to control the Land Leveling System and display information about the operation of the system.View
3231Single Land Leveling System SupervisorThis device is the Land Leveling System Supervisor for a single control loop.View
1162Slope SensorA device that measures the slope along an axis.View
3226Slope SensorA device that measures the slope along an axis.View
 31Starter System View
 77Steering Column UnitDevice that gathers the operator inputs from switches/levers/etc located in and/or around the steering wheel/columnView
 19Steering Controller View
1228Steering Input UnitMay be used for measuring steering angle, steering torsion, steering force feedback, etc.View
3235Supplemental Sensor Processing Unit #1 View
5235Supplemental Sensor Processing Unit #1 View
3236Supplemental Sensor Processing Unit #2 View
5236Supplemental Sensor Processing Unit #2 View
3237Supplemental Sensor Processing Unit #3 View
5237Supplemental Sensor Processing Unit #3 View
3238Supplemental Sensor Processing Unit #4 View
5238Supplemental Sensor Processing Unit #4 View
3239Supplemental Sensor Processing Unit #5 View
5239Supplemental Sensor Processing Unit #5 View
3240Supplemental Sensor Processing Unit #6 View
5240Supplemental Sensor Processing Unit #6 View
 21Suspension - Drive Axle #1The suspension on the first drive axle - may only be used for the NAME Function of 18, Function Instance 0, and an ecu instance of 0.View
 22Suspension - Drive Axle #2The second PA available for use for the function, suspension on drive axle. It may be used by the “second” drive axle’s suspension system (Function 18, Function Instance 1, ECU Instance 0), but when there is no second drive axle it may be used by the second ecu on the first drive axle’s suspension (Function 18, Function Instance 0, ECU Instance 1).View
 20Suspension - Steer Axle View
 47Suspension - System Controller #1The first Suspension - System Controller - may only be used for the NAME Function of 35, Function Instance 0, and an ecu instance of 0.View
 64Suspension - System Controller #2 View
1238Tachograph View
2241Tailings MonitoringMonitoring of the quantity of unthreshed material returned to threshing machineView
2247Task Control (Mapping Computer)A control function on the 11783 network that is responsible for the sending, receiving and logging of process dataView
 95thru 127 are reserved for future assignment by SAE View
1128thru 158 are reserved for future assignment by SAE but available for use by self configurable ECUsUsed for dynamic address assignmentView
3128thru 207 are reserved for future assignment by SAEUsed for dynamic address assignment (self-configurable)View
4128thru 207 are reserved for future assignment by SAEUsed for dynamic address assignment (self-configurable)View