Details for DDEntity "666 - Working Direction"
| 666 - Working Direction Request changes |
|---|
| Definition | This DDI specifies the intended working direction in the field and also defines the numbering of the bouts. 0 working direction is unknown 1 working direction is from left to right, compared to A-B-reference line 2 working direction is from right to left, compared to A-B-reference line 3 to 2.147.483.647 reserved for future assignment If the working direction is 1 (working from left to right, compared to A-B-reference line) the numbering of the bouts is also from left to right in ascending order. If the working direction is 2 (working from right to left, compared to A-B-reference line) the numbering of the bouts is from right to left in ascending order. |
|---|---|
| Comment | This DDI is an implement track parameter and specifies the intended working direction in the field and also defines the numbering of the bouts. For more details see attachment DDI 505. |
| Typically used by Device Class(es) |
4 -
Planters /Seeders |
|---|
| Unit Symbol | not defined - |
|---|---|
| Bit Resolution | 1 |
| SAE SPN | |
| CANBus Range | 0 to 2 |
| Display Range | 0 to 2 |
| Submit Date | 2015-12-10 |
| Submit By | Karsten Helweg |
| Submit Company | Competence Center ISOBUS e.V. |
| Revision Number | 2 |
| Current Status | ISO-Published |
| Status Date | 2026-01-29 |
| Status Comments | Status was published |
|
|
|
|
2026-01-29: ISO-Published
Status was published
2026-01-26: New Request Submitted
2015-12-10: Request Pending
2022-12-02: Published
|