Details for DDEntity "513 - Guidance Line Deviation"

513 - Guidance Line Deviation Request changes
DefinitionThis DDI specifies the deviation in mm from this guidance line and the device reference point (DRP) which is guided along the guidance line when looking from the implement to the actual guidance track number.
CommentThis DDI specifies the deviation in mm from this guidance line and the device reference point (DRP) which is guided along the guidance line when looking from the implement to the actual guidance track number (unique guidance track number). The value is positive when the guidance line is located on the right-hand side of the device reference point. The value is negative when the guidance line is located on the left-hand side of the device reference point. This value is provided by the task controller server from the guidance system. For more details see also attachment on DDI 505.
Typically used by Device Class(es) 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
17 - Sensor System
25 - Slurry Applicators
Unit Symbolmm -
Bit Resolution1
SAE SPN
CANBus Range-2147483648 to 2147483647
Display Range-2147483648 to 2147483647
Submit Date2015-12-10
Submit ByKarsten Helweg
Submit CompanyCompetence Center ISOBUS e.V.
Revision Number2
Current StatusISO-Published
Status Date2026-01-29
Status CommentsStatus was published
2026-01-29: ISO-Published Status was published
2026-01-26: New Request Submitted
2015-12-10: Request Pending
2016-09-01: ISO-Published

Back