Details for DDEntity "179 - Actual Cultural Practice"

179 - Actual Cultural Practice Request changes
DefinitionThis DDI is used to define the current cultural practice which is performed by an individual device operation. For instance a planter/seeder could provide a sowing and a fertilizing operation at the same time. The cultural practice value definitions are: 0=Unknown, 1=Fertilizing, 2=Sowing and Planting, 3=Crop Protection, 4=Tillage, 5=Baling (Pressing), 6=Mowing, 7=Wrapping, 8=Harvesting, 9=Forage Harvesting, 10=Transport, 11=Swathing, 12=Slurry/Manure Application, 13=Self-Loading Wagon, 14=Tedding, 15=Measuring, 16=Irrigation, 17=Feeding/Mixing, 18=Mulching, 19-255=Reserved for future Assignment See attachment for more information.
CommentImplements as Planter or Seeder which provides more than one product application need an option to sign the cultural practice that is performed by each operation. More then ever if the applied products have the same unit type. As for instance a seeder provides a sowing and fertilizing operation which have both mass per area as unit defined. In this case it is not clear to the TC that the second operation is a fertilizing operation. Particular if the TC owns a user interface to display these information to the operator. Through this DDE the TC user interface can display the appropriate information. Adding this DDI to the device element of type device the main cultural practice of the device could be defined. For instance a baler will claim on the bus as forage device class and have set the actual cultural practice as baling.
Typically used by Device Class(es) 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
Unit Symboln.a. - not applicable
Bit Resolution1
SAE SPN
CANBus Range0 to 2147483647
Display Range0 to 2147483647
Submit Date2010-01-15
Submit ByMatthias Meyer
Submit Company33 - John Deere
Revision Number2
Current StatusISO-Published
Status Date2015-01-28
Status Comments
Multiple and Single Product Implement Description.pdf
161.06 KB Upload: 2011-01-11 12:01:21

2015-01-28: ISO-Published
2011-01-11: Not Specified

Back