Details for DDEntity "239 - Yield Hold Status"
239 - Yield Hold Status Request changes |
---|
Definition | Status indicator for the yield measurement system. When enabled/on, the measurements from the yield measurement system are ignored and the yield is held constant. 2 bit status indicator: 00=disabled/off 01=enabled/on 10=error 11=undefined/not installed |
---|---|
Comment | This status indicator can e.g. be set by the operator when entering an area of the field where the yield measurement system yield measurements should not be used. This DDE shall not be setable by the TC. The values of the following list of DDE's is are held constant when this DDE is enabled/on: DDI's 83 to 91, 181 to 183 and 185 to 190. |
Typically used by Device Class(es) |
6 -
Sprayers 7 - Harvesters 8 - Root Harvester 9 - Forage harvester 14 - Special Crops |
---|
Unit Symbol | n.a. - not applicable |
---|---|
Bit Resolution | 1 |
SAE SPN | |
CANBus Range | 0 to 3 |
Display Range | 0 to 3 |
Submit Date | 2011-07-08 |
Submit By | Robert Waggoner |
Submit Company | AGCO |
Revision Number | 1 |
Current Status | ISO-Published |
Status Date | 2011-10-17 |
Status Comments |
|
|
2011-10-17: ISO-Published
|