Details for DDEntity "288 - Actual Prescription Mode"

288 - Actual Prescription Mode Request changes
DefinitionThis DDE defines the actual source of the set point value used by the Control Function. This DDI shall be defined as DPD in the DDOP and shall not be setable and need to support the on change trigger. The TC should request this DDI in case of an active prescription operation for documentation purpose.
CommentThe Control Function Prescription Mode sahll have one of the following values: 0 = Unknown / not defined 1 = TC rate 2 = Manual Entry 3 = Peer Control 4 = Max override 5 = Min override 6 and higher are reserved for future assignments
Typically used by Device Class(es) 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
Unit Symboln.a. - not applicable
Bit Resolution1
CANBus Range0 to 5
Display Range0 to 5
Submit Date2013-09-23
Submit ByJoe Tevis
Submit CompanyTopcon
Revision Number2
Current StatusISO-Submitted (Pending)
Status Date2015-07-30
Status Comments
2015-07-30: ISO-Submitted (Pending)
2013-09-23: Request Pending