Details for DDEntity "515 - Tramline Control State"
515 - Tramline Control State Request changes |
---|
Definition | Specifies the actual state of Tramline Control. The value definitions are: Byte 1 Bits 0-1 = 00 manual/off Byte 1 Bits 0-1 = 01 automatic/on Byte 1 Bits 0-1 = 10 error Byte 1 Bits 0-1 = 11 undefined/not supported Byte 1 Bits 2-7 reserved, set to 0. The DDI shall support the OnChange trigger so that the Task Controller is able to get informed when the value gets changed by the Working Set Master. The Task Controller shall activate this trigger when using the DDI. |
---|---|
Comment | The Tramline Control State has the same purpose and definition like the Section Control State DDI 160. For more details see also attachment on DDI 505. |
Typically used by Device Class(es) |
4 -
Planters /Seeders |
---|
Unit Symbol | n.a. - not applicable |
---|---|
Bit Resolution | 1 |
SAE SPN | |
CANBus Range | 0 to 3 |
Display Range | 0 to 3 |
Submit Date | 2015-12-10 |
Submit By | Karsten Helweg |
Submit Company | Competence Center ISOBUS e.V. |
Revision Number | 1 |
Current Status | ISO-Published |
Status Date | 2016-09-01 |
Status Comments |
|
|
2016-09-01: ISO-Published
2015-12-10: Request Pending
|