Details for DDEntity "519 - Last Bale Lifetime Count"

519 - Last Bale Lifetime Count Request changes
DefinitionThe Lifetime Bale Count of the bale that leaves the machine.
The value shall be equal to the Lifetime Bale Count that was reported when this bale is knotted.
CommentThe recommended use of this DDE is for a baler to report this once
for every bale that leaves the machine. A baler can add this to its default set
of data, based on an internal on-change data trigger that causes the
baler to report the value of this DDE when the bale leaves the machine. The
recommendation for data logging is that all "Last Bale" DDEs that are
supported by a device are reported together at the moment that the
bale leaves the machine. The value shall be equal to the Lifetime Bale Count that was reported when this bale is knotted.
Typically used by Device Class(es) 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
Unit Symboln.a. - not applicable
Bit Resolution1
SAE SPN
CANBus Range0 to 2147483647
Display Range0 to 2147483647
Submit Date2016-06-06
Submit CompanyMaschinenfabrik Bernard Krone
Revision Number1
Current StatusISO-Published
Status Date2016-09-19
Status Comments
2016-09-19: ISO-Published
2016-06-06: Request Pending Currently, there is an unspecific definition regarding all "Last Bale" DDEs, as they shall be reported "when the bale is produced and leaves the machine". The original wording is: "The recommended use of this DDE is for a baler to report this once fo

Back