Details for DDEntity "521 - GNSS Installation Type"
521 - GNSS Installation Type Request changes |
---|
Definition | The GNSS Installation Type DDE is used by the device to provide additional information about the type and location of the GPS receiver with reference to the overall system. Additional information are required especially when more than one GNSS receiver is installed on the system. The GPS Installation Type value is an instance enumeration with the following definitions: 0 = Unknown 1 = Tractor integrated antenna 2 = Tractor universal antenna (removable) 3 = First Implement antenna 4 = Second Implement antenna 5 = Display integrated antenna 6 to 100 Reserved |
---|---|
Comment | Today some devices are equipped with more than one GPS receivers for certain applications. In this case both do have different offset defined and therefore an application need to be able to identify each receiver clearly. This DDI does provide the possibility to add these additional information below the appropriate device element. |
Typically used by Device Class(es) |
1 -
Tractor 2 - Primary Soil Tillage 3 - Secondary Soil Tillage 4 - Planters /Seeders 5 - Fertilizer 6 - Sprayers 7 - Harvesters 8 - Root Harvester 9 - Forage harvester 10 - Irrigation 11 - Transport / Trailers 12 - Farmyard Work 13 - Powered Auxilary Units 14 - Special Crops 15 - Municipal Work 17 - Sensor System 18 - Reserved for Future Assignment 19 - Timber Harvesters 20 - Forwarders 21 - Timber loaders 22 - Timber Processing Machines 23 - Mulchers 24 - Utility Vehicles 25 - Slurry Applicators 26 - Feeder / Mixer |
---|
Unit Symbol | n.a. - not applicable |
---|---|
Bit Resolution | 1 |
SAE SPN | |
CANBus Range | 0 to 100 |
Display Range | 0 to 100 |
Submit Date | 2016-10-17 |
Submit By | Meyer Matthias |
Submit Company | John Deere |
Revision Number | 1 |
Current Status | ISO-Published |
Status Date | 2016-11-28 |
Status Comments |
|
|
2016-11-28: ISO-Published
2016-10-17: Request Pending
|