Details for DDEntity "594 - Steering Type"
594 - Steering Type Request changes |
---|
Definition | Steering Type DDI is used to define the current active steering type of a machine. This information can be used to finetune or adjust system behavior or to document which steering type was used during operation. The current supported steering types are listed below: 0 -- unknown 1 – Articulated 2 – Differential 3 - Front wheel 4 - Rear wheel 5 - Four wheel 6 - Differential Front with Active Rear support 7 – Dog-walk Machine >=8 are reserved for future assignments |
---|---|
Comment | Steering type reported by device for use by guidance systems. Depending on the DDI implementation and machine capabilities the Steering Type could change during operation. For more details and examples see attachment. |
Typically used by Device Class(es) |
0 -
Non-specific system 1 - Tractor 4 - Planters /Seeders 5 - Fertilizer 6 - Sprayers 7 - Harvesters 8 - Root Harvester 9 - Forage harvester 11 - Transport / Trailers 24 - Utility Vehicles 25 - Slurry Applicators |
---|
Unit Symbol | n.a. - not applicable |
---|---|
Bit Resolution | 1 |
SAE SPN | |
CANBus Range | 0 to 7 |
Display Range | 0 to 7 |
Submit Date | 2020-02-10 |
Submit By | Paul Matthews |
Submit Company | AGCO |
Revision Number | 1 |
Current Status | Published |
Status Date | 2020-02-10 |
Status Comments | First release |
|
||||||||||
2020-02-10: Published
First release
2019-07-08: New Request Submitted
|