Details for DDEntity "600 - Lifetime Total Distance Field"

600 - Lifetime Total Distance Field Request changes
DefinitionEntire Total Distance on the field of the device lifetime
CommentThis is the overall total of the device. This total does not refer to an application controlled by a Task Controller. Therefore this DDE shall not be setable within the device description and neither shall the device reset the value when the task status changed. It is up to the device control system when to reset this value. The Working Set Master shall support the total trigger method for this DDE but shall not support the setable property. The Task Controller can request and store this DDE at the end of a task. But it shall not set this DDE when the task is resumed.
Typically used by Device Class(es) - Not Assigned
0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
18 - Reserved for Future Assignment
19 - Timber Harvesters
20 - Forwarders
21 - Timber loaders
22 - Timber Processing Machines
23 - Mulchers
24 - Utility Vehicles
25 - Slurry Applicators
26 - Feeder / Mixer
Unit Symbolm -
Bit Resolution1
SAE SPN
CANBus Range0 to 2147483647
Display Range0 to 2147483647
Submit Date2019-11-19
Submit ByMarc-Kevin Doeker
Submit CompanyMaschinenfabrik Bernard Krone GmbH & Co. KG
Revision Number1
Current StatusPublished
Status Date2019-12-16
Status Comments
2019-12-16: Published
2019-12-16: ISO-Published Status was published
2019-11-19: New Request Submitted

Back