Details for DDEntity "595 - Machine Mode"
| 595 - Machine Mode Request changes |
|---|
| Definition | This mode does represent the overall current machine mode and shall be used only one time within the DDOP below the device element of type device. If a machine is capable of differentiating between different modes it can be indicated by this mode. The value definitions are 0 = Unknown / Not defined 1 = Idle 2 = Field Mode 3 = Street Mode 4 = Maintenance 5 = Filling 6 = Emptying 7 = Cleaning 8 and higher are reserved for future assignments |
|---|---|
| Comment | In addition to the current workstate, some machines are capable of differentiating between different modes. In idle/neutral mode, value 1 (Idle) should be used. If a machine is in working/field mode, value 2 (Field Mode) should be indicated. Moving the machine on a road/street should be indicated by value 3 (Street Mode). During maintenance/servicing, the value 4 (Maintenance) must be selected. If the machine is in an unspecified state, value 0 (Unknown / Not defined) should be used. Note: this mode does not define the Work State of a machine function Examples: * A sprayer in the field performing a spraying application is in field mode. A sprayer at the farm filling the bin is in filling mode * A combine harvesting in the field would be in field mode. To indicate unloading the harvester bin DDI 240 should be used |
| Typically used by Device Class(es) |
-
Not Assigned 0 - Non-specific system 1 - Tractor 2 - Primary Soil Tillage 3 - Secondary Soil Tillage 4 - Planters /Seeders 5 - Fertilizer 6 - Sprayers 7 - Harvesters 8 - Root Harvester 9 - Forage harvester 10 - Irrigation 11 - Transport / Trailers 12 - Farmyard Work 13 - Powered Auxilary Units 14 - Special Crops 15 - Municipal Work 17 - Sensor System 18 - Reserved for Future Assignment 19 - Timber Harvesters 20 - Forwarders 21 - Timber loaders 22 - Timber Processing Machines 23 - Mulchers 24 - Utility Vehicles 25 - Slurry Applicators 26 - Feeder / Mixer |
|---|
| Unit Symbol | n.a. - not applicable |
|---|---|
| Bit Resolution | 1 |
| SAE SPN | |
| CANBus Range | 0 to 2147483647 |
| Display Range | 0 to 2147483647 |
| Submit Date | 2019-12-04 |
| Submit By | Marc-Kevin Doeker |
| Submit Company | Maschinenfabrik Bernard Krone GmbH & Co. KG |
| Revision Number | 1 |
| Current Status | Published |
| Status Date | 2020-09-21 |
| Status Comments | Added mode 5 to 7; Update definition and comment |
|
|
|
|
2020-09-21: Published
Added mode 5 to 7; Update definition and comment
2019-12-16: Published
2019-12-16: ISO-Published
Status was published
2019-12-04: New Request Submitted
|