Details for DDEntity "596 - Cargo Area Cover State"

596 - Cargo Area Cover State Request changes
DefinitionCurrent state of the Cargo Area Cover. Used to determine whether the Cargo Area was covered during transport or other activities. The Cargo Area Cover State is a value from -1 to 100 % . The value definitions are: -1 = Not defined/Unknown 0 = cover open 100 = cover fully closed
CommentUsed to determine whether the Cargo Area is covered during transport or other activities. If the Cargo Area is not covered, value 0 (Open) should be used. If the Cargo Area is fully covered, value 100 (Closed) should be used. If the state changes from open to closed - or vice versa - then a value between 1 and 99 (Intermediate Position) must be selected. If the status cannot be determined, value -1 (Unknown / Not defined) should be used.
Typically used by Device Class(es) - Not Assigned
0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
18 - Reserved for Future Assignment
19 - Timber Harvesters
20 - Forwarders
21 - Timber loaders
22 - Timber Processing Machines
23 - Mulchers
24 - Utility Vehicles
25 - Slurry Applicators
26 - Feeder / Mixer
Unit Symbol% -
Bit Resolution1
SAE SPN
CANBus Range-1 to 100
Display Range-1 to 100
Submit Date2019-12-04
Submit ByMarc-Kevin Doeker
Submit CompanyMaschinenfabrik Bernard Krone GmbH & Co. KG
Revision Number1
Current StatusPublished
Status Date2019-12-16
Status Comments
2019-12-16: Published
2019-12-16: ISO-Published Status was published
2019-12-04: New Request Submitted

Back