Details for DDEntity "630 - Setpoint Tramline Condensed Work State (209-224)"

630 - Setpoint Tramline Condensed Work State (209-224) Request changes
DefinitionThe Setpoint Tramline Condensed Work State DDIs are the control command counterparts to the Actual Tramline Condensed Work States DDIs. The value is a combination of the Setpoint Tramline Valve Work States of individual Tramline Valves number 209 to 224 into a single Setpoint Tramline Condensed Work State of their parent DeviceElement. The Setpoint Tramline Condensed Work State contains the child element Setpoint Tramline Work States, in the driving direction from left to right, where the leftmost child element Setpoint Tramline Work State are the 2 lowest significant bits of the Process Data Value. Each child device elements Setpoint Work State is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element Setpoint Tramline Work States can be contained in one Setpoint Tramline Condensed Work State of their parent DeviceElement. If less than 16 child device element Setpoint Tramline Work States are available, then the unused bits shall be set to value 11 (no change).
CommentThe Setpoint Tramline Condensed Work State 209-224 has the same purpose and definition like the Setpoint Condensed Work State 209-224 DDI 303. For more details see also attachment on DDI 505.
Typically used by Device Class(es) 4 - Planters /Seeders
Unit Symboln.a. - not applicable
Bit Resolution1
SAE SPN
CANBus Range0 to 4294967295
Display Range0 to 4294967295
Submit Date2019-12-11
Submit ByDominik Diekmann
Submit CompanyCompetence Center ISOBUS e.V.
Revision Number1
Current StatusPublished
Status Date2019-12-16
Status Comments
2019-12-16: Published
2019-12-11: New Request Submitted

Back