Details for DDEntity "656 - SC Actual Turn On Time"
656 - SC Actual Turn On Time Request changes |
---|
Definition | Definition: The Section Control Actual Turn On Time defines the overall time lapse between the moment the TC client sends the actual Section state and the moment this section is physically turned on and the product is applied. The working set may support this DDE as an optional feature to provide the possibility to store the time settings direct on the device to make the settings available after a power cycle. Therefore this DDE needs always to be settable by the TC and shall not be used to change any working set system behavior. The DDI shall support the On Change trigger so that the TC is able to get informed when the value gets changed by the Working Set Master. The TC shall activate this trigger when using the DDI. |
---|---|
Comment | This value should be provided by the implement manufacturer if applicable and otherwise only DDI 205 "SC Setpoint Turn On Time" shall be provided. If the system does not define SC Actual Turn On Time and SC Setpoint Turn On Time separately, it implies that "SC Setpoint Turn On Time" may be considered for drawing Actual Coverage. If "SC Actual Turn On Time" is defined as 0, the coverage ON shall be immediate. The usage of " SC Actual Turn On Time" does not eliminate usage of "SC Setpoint Turn On time - DDI 205", it is supporting information for better coverage Map based on Actual CWS. See also DDI 205 including attachment and DDI 206 and 657 |
Typically used by Device Class(es) |
1 -
Tractor 4 - Planters /Seeders 5 - Fertilizer 6 - Sprayers |
---|
Unit Symbol | not defined - |
---|---|
Bit Resolution | 1 |
SAE SPN | |
CANBus Range | -2147483648 to 2147483647 |
Display Range | -2147483648 to 2147483647 |
Submit Date | 2021-10-14 |
Submit By | Rajashri Munot |
Submit Company | John Deere |
Revision Number | 1 |
Current Status | Published |
Status Date | 2022-01-10 |
Status Comments | First version |
|
|
2022-01-10: Published
First version
2021-10-14: New Request Submitted
The new DDI request is from TC Working group
|