| SPN | 5141 |
|---|---|
| SP Name | Operator Status Sequence Counter |
| SP Description | The operator status sequence counter is a counter of the messages transmitted by the transmitting Control Function on the network, not of the time elapsed between the messages, and therefore conveys no information about the message interval time. After a power on or reset of the transmitting control function, the SPN value shall be set to 251 to indicate the reset of this counter. From there, the SPN value shall roll over to 0 and continue to increase in increments of 1 to a maximum value of 250, then roll over to a value of 0 and continue incrementing (modulus 250). Value Meaning 0x0-0xFA Counter values (incrementing by 1, roll-over at FA16: 016-116-…- FA16-016-116-…) 0xFB Reset of Operator Status Sequence Counter 0xFC - 0xFD Reserved 0xFE Error condition on sender 0xFF Graceful shutdown |
| Sp Notes | Not set |
| Has Attachment | yes |
| SP Historical Remarks | no |
| SP Historical Attachment | no |
| From 2015/2019 | 2018 |
| SP Length | 8 bits |
| Scaling | 256 states/8 bit |
| Offset | 0 |
| Data Range | 0 to 255 |
| Operational Range | Not set |
| Units | bit |
| Slot Identifier | 93 |
| Slot Name | SAEbs08 |
| SP Type | Measured |
| SP Reference | Not set |
| Scale Factor (value only) | 1 |
| Offset (value only) | 0 |
| Range maximum (value only) | 255 |
| Length minimum (value only) | 8 |
| Length maximum (value only) | 8 |
| SP Document | ISO 11783-7 |
| PG Created or Modified Date | 2017-11-20 |
| PG SP Mapping Created/Mod. Date | 2017-11-20 |
