PGN65089
PG LabelLighting command
PG AcronymLCMD
PG NotesGlobal message from the tractor to all lighting controllers on the tractor and attached implements.

Separate parameters are provided for tractor and implement work and driving lights. Additional commands are provided for three optional lights on implements to meet the needs of speciality equipment. Common marking and signalling parameters are provided.

This message is used to communicate the state of all lighting functions. It shall be sent on each change of state of a lamp, or at a periodic rate to provide synchronization of turn signal and hazard flashers. The state values indicate that the light is to be turned ON or OFF. Flashing is communicated by sending the lighting message with the state alternately ON or OFF. A lighting command message shall be sent at least once per second.

Control of homologated lighting on the implement(s) shall be accomplished via the 7-pin lighting connector and shall not be dependent on the Lighting Command message available on the implement bus. The Lighting Command message may be utilized to control non-homologated lighting and for diagnostics.
Pgn Notes-
EDP0
DP0
PF254
PS65
MultipacketNo
Transmission RateOn change of lamp ON/OFF state. Maximum period of 1 s between messages. No greater than 10 messages per second for all lights.
PG Data Length8
Default Priority3
PG ReferenceNot set
Sp Start Bit8.1
PG DocumentISO 11783-7
PG Created or Modified Date2010-05-20
PG SP Mapping Created/Mod. Date2000-08-10

Linked SPNs

Displaying 1-32 of 32 results.
SPNSP NameSP Position In PGSP LengthScalingOffset 
2403Daytime running lights — Command1.12 bits4 states/2 bit0View
2351Alternate headlights — Command1.32 bits4 states/2 bit0View
2349Low-beam headlights — Command1.52 bits4 states/2 bit0View
2347High-beam headlights — Command1.72 bits4 states/2 bit0View
2387Tractor front fog lights — Command2.12 bits4 states/2 bit0View
2385Rotating beacon light — Command2.32 bits4 states/2 bit0View
2369Right-turn signal lights — Command2.52 bits4 states/2 bit0View
2367Left-turn signal lights — Command2.72 bits4 states/2 bit0View
2391Back-up lights and alarm horn — Command 3.12 bits4 states/2 bit0View
2375Centre stop lights — Command3.32 bits4 states/2 bit0View
2373Right stop lights — Command3.52 bits4 states/2 bit0View
2371Left stop lights — Command3.72 bits4 states/2 bit0View
2383Implement clearance lights — Command4.12 bits4 states/2 bit0View
2381Tractor clearance lights — Command4.32 bits4 states/2 bit0View
2379Implement marker (position) lights — Command4.52 bits4 states/2 bit0View
2377Tractor marker (position) lights — Command4.72 bits4 states/2 bit0View
2389Rear fog lights — Command5.12 bits4 states/2 bit0View
2357Tractor underside-mounted work lights — Command5.32 bits4 states/2 bit0View
2359Tractor rear low-mounted work lights — Command5.52 bits4 states/2 bit0View
2361Tractor rear high-mounted work lights — Command5.72 bits4 states/2 bit0View
2363Tractor side low-mounted work lights — Command6.12 bits4 states/2 bit0View
2365Tractor side high-mounted work lights — Command6.32 bits4 states/2 bit0View
2353Tractor front low-mounted work lights — Command6.52 bits4 states/2 bit0View
2355Tractor front high-mounted work lights — Command6.72 bits4 states/2 bit0View
2397Implement OEM option 2 light — Command7.12 bits4 states/2 bit0View
2395Implement OEM option 1 light — Command7.32 bits4 states/2 bit0View
2406Implement right forward work lights — Command7.52 bits4 states/2 bit0View
2597Implement left forward work lights — Command7.72 bits4 states/2 bit0View
2393Lighting data message request — Command8.12 bits4 states/2 bit0View
2401Implement right-facing work lights — Command8.32 bits4 states/2 bit0View
2399Implement left-facing work lights — Command8.52 bits4 states/2 bit0View
2405Implement rear work lights — Command 8.72 bits4 states/2 bit0View