PGN65096
PG LabelWheel-based Speed and Distance
PG AcronymWBSD
PG NotesMessage sent by the Tractor ECU on the implement bus on construction and agricultural implements providing to connected systems the current measured wheel-based speed. The message also includes a free-running distance counter, an indication of the direction of travel and the state of the start/stop switch or input.

When the ignition key switch is turned off, both the ECU_PWR and PWR have to be maintained to send this message for an additional 2 s. This is not required when the engine is cranking (starting).
Pgn NotesAccuracies of both wheel-based and ground-based sources can be speed-dependent and degrade at low speeds. Wheel-based information might not be updated at the 100 ms rate at low speeds.
EDP0
DP0
PF254
PS72
MultipacketNo
Transmission Rate100 ms
PG Data Length8
Default Priority3
PG ReferenceNot set
Sp Start Bit8.5
PG DocumentISO 11783-7
PG Created or Modified DateNot set
PG SP Mapping Created/Mod. DateNot set

Linked SPNs

Displaying 1-7 of 7 results.
SPNSP NameSP Position In PGSP LengthScalingOffset 
1862Wheel-based machine speed1-216 bits0.001 m/s per bit0View
1863Wheel-based machine distance3-632 bits0.001 m/bit0View
1866Maximum Time of Tractor Power78 bits1 min/bit0View
1864Wheel-based machine direction8.12 bits4 states/2 bit0View
1865Key switch state8.32 bits4 states/2 bit0View
5203Implement Start/Stop operations8.52 bits4 states/2 bit0View
5244Operator direction reversed8.72 bits4 states/2 bit0View