| SPN | 9730 |
|---|---|
| SP Name | General-purpose valve exit/reason code |
| SP Description | This parameter is used to indicate why the general purpose valve cannot accept remote commands or has most recently stopped accepting remote commands. Data length: 5 bits Value Meaning 00000 No reason/all clear 00001 Required level of operator presence/awareness not detected 00010 Implement released control of function 00011 Operator override of function 00100 Operator control not in valid position 00101 Remote command timeout 00110 Remote command out of range/invalid 00111 Function not calibrated 01000 Operator control fault 01001 Function fault 01010 to 01111 Reserved 10000 Hydraulic oil level too low 10001 Valve locked out 10010 to 11101 Manufacturer specific 11110 Error 11111 Not available (parameter not supported) |
| Sp Notes | Not set |
| Has Attachment | no |
| SP Historical Remarks | - |
| SP Historical Attachment | no |
| From 2015/2019 | 2018 |
| SP Length | 5 bits |
| Scaling | 32 states/5 bit |
| Offset | 0 |
| Data Range | 0 to 31 |
| Operational Range | Not set |
| Units | bit |
| Slot Identifier | 90 |
| Slot Name | SAEbs05 |
| SP Type | Estimated |
| SP Reference | Not set |
| Scale Factor (value only) | 1 |
| Offset (value only) | 0 |
| Range maximum (value only) | 31 |
| Length minimum (value only) | 5 |
| Length maximum (value only) | 5 |
| SP Document | ISO 11783-7 |
| PG Created or Modified Date | 2002-08-09 |
| PG SP Mapping Created/Mod. Date | 2017-11-20 |
