SPN | 9729 |
---|---|
SP Name | General-purpose valve retract port high resolution estimated flow |
SP Description | The value reported by the controller of flow through the retract port of a general-purpose valve, which could be based on the commanded position of the valve. If this parameter is “not available” (all 1’s) then only the original resolution parameters (see A.21.35 and A.21.36) are populated. 0 % indicates no flow, 100 % indicates maximum flow, −100 % indicates maximum flow returning to the valve through this port. Caution should be exercised when using this parameter in feedback control systems because this parameter is estimated and not measured. |
Sp Notes | Not set |
Has Attachment | no |
SP Historical Remarks | - |
SP Historical Attachment | no |
From 2015/2019 | 2018 |
SP Length | 16 bits |
Scaling | 0.004 %/bit |
Offset | -125 % |
Data Range | -125 to 132.02 % |
Operational Range | -100 to 100 % |
Units | % |
Slot Identifier | 264 |
Slot Name | SAEpc09 |
SP Type | Estimated |
SP Reference | Not set |
Scale Factor (value only) | 0.004 |
Offset (value only) | -125 |
Range maximum (value only) | 132.02 |
Length minimum (value only) | 16 |
Length maximum (value only) | 16 |
SP Document | ISO 11783-7 |
PG Created or Modified Date | 2002-08-09 |
PG SP Mapping Created/Mod. Date | 2017-11-20 |