| SPN | 4307 |
|---|---|
| SP Name | Machine selected speed limit status |
| SP Description | This parameter is used to report the Tractor ECU's present limit status associated with a parameter whose commands are persistent (i.e. not transient/temporary/one-shot). Value Meaning 000 Not limited 001 Operator limited/controlled (request cannot be implemented) 010 Limited high (only lower command values result in a change) 011 Limited low (only higher command values result in a change) 100 Reserved 101 Reserved 110 Non-recoverable fault 111 Not available (parameter not supported) |
| Sp Notes | Not set |
| Has Attachment | no |
| SP Historical Remarks | - |
| SP Historical Attachment | no |
| From 2015/2019 | 2015 |
| SP Length | 3 bits |
| Scaling | 8 states/3 bit |
| Offset | 0 |
| Data Range | 0 to 7 |
| Operational Range | Not set |
| Units | bit |
| Slot Identifier | 88 |
| Slot Name | SAEbs03 |
| SP Type | Measured |
| SP Reference | Not set |
| Scale Factor (value only) | 1 |
| Offset (value only) | 0 |
| Range maximum (value only) | 7 |
| Length minimum (value only) | 3 |
| Length maximum (value only) | 3 |
| SP Document | ISO 11783-7 |
| PG Created or Modified Date | 2007-08-15 |
| PG SP Mapping Created/Mod. Date | 2007-08-15 |
