| SPN | 9725 |
|---|
| SP Name | Rear hitch yaw command |
|---|
| SP Description | Command for setting the yaw angle of the rear three-point hitch like defined in A.19.45 and A.19.46. To enable the command, Rear hitch yaw angle actual control mode (see A.19.47) must be value 0101. |
|---|
| Sp Notes | Not set |
|---|
| Has Attachment | no |
|---|
| SP Historical Remarks | - |
|---|
| SP Historical Attachment | no |
|---|
| From 2015/2019 | 2018 |
|---|
| SP Length | 16 bits |
|---|
| Scaling | 1/128 deg/bit |
|---|
| Offset | -200 |
|---|
| Data Range | -200 to 200 deg |
|---|
| Operational Range | Not set |
|---|
| Units | deg |
|---|
| Slot Identifier | 8 |
|---|
| Slot Name | SAEad04 |
|---|
| SP Type | Command |
|---|
| SP Reference | Not set |
|---|
| Scale Factor (value only) | 0.0078125 |
|---|
| Offset (value only) | -200 |
|---|
| Range maximum (value only) | 301.9921875 |
|---|
| Length minimum (value only) | 16 |
|---|
| Length maximum (value only) | 16 |
|---|
| SP Document | ISO 11783-7 |
|---|
| PG Created or Modified Date | 2017-11-20 |
|---|
| PG SP Mapping Created/Mod. Date | 2017-11-20 |
|---|
Linked PGNs
Displaying 1-1 of 1 result.
3473
