Addresses
To search a certain item enter you search-text into the input field and press return.
You may optionally enter a comparison operator (<, <=, >, >=, <>
or =) at the beginning of each of your search values to specify how the comparison should be done.
Displaying 101-200 of 264 results.
| Industry Group | Source Address | Name | Notes | |
|---|---|---|---|---|
| 1 | 167 | Instrument Cluster #2 | A second optional, or auxiliary, gauge display for a vehicle |  |
| 3 | 232 | Land Leveling Electric Mast | A device that moves a Sensor to maintain a specific position. | |
| 3 | 230 | Land Leveling System Display | This device displays position information at a remote location. | |
| 3 | 234 | Laser Receiver | A device that receives a laser strike, and reports the specific position. | |
| 3 | 229 | Laser Tracer | A device that receives a laser strike and reports the vertical and horizontal position. | |
| 3 | 225 | Lift Arm Controller | Controls the lift arms and tilt functions on a construction loader, skid steer loader, or similar machine. Refers to the main elevation and tilt functions of the machine's lift arms but may not include the control of the attachment itself. | |
| 55 | Lighting - Operator Controls | | ||
| 3 | 228 | Loader Control | Controls the hydraulic system of the loader attachment of a loader/backhoe, wheel loader, skid steer, or similar vehicle | |
| 3 | 227 | Main Controller - Skid Steer Loader | Primary system controller for skid steer loader | |
| 39 | Management Computer #1 | The first Management Computer - may only be used for the NAME Function of 30, Function Instance 0, and an ecu instance of 0. | | |
| 4 | 242 | Marine Display #1 | The first Marine Display for an engine. | |
| 4 | 243 | Marine Display #2 | The second Marine Display for an engine. | |
| 4 | 244 | Marine Display #3 | The third Marine Display for an engine. | |
| 4 | 245 | Marine Display #4 | The fourth Marine Display for an engine. | |
| 4 | 246 | Marine Display #5 | The fifth Marine Display for an engine. | |
| 4 | 247 | Marine Display #6 | The sixth Marine Display for an engine. | |
| 2 | 245 | Non Virtual Terminal Display (Implement Bus) | A non Virtual Terminal cab display connected to the implement bus | |
| 254 | Null Address | The NULL address is only for use within J1939-81 Network Management communications to indicate the Controller Application (CA) has not yet successfully claimed an address. The NULL address is only permitted in the Source Address field of the J1939 message identifier. | | |
| 249 | Off Board Diagnostic-Service Tool #1 | The address for the first off board diagnostic service tool - may only be used for the NAME Function of 129, Industry Group 0, Function Instance 0, and an ECU instance of 0. | | |
| 250 | Off Board Diagnostic-Service Tool #2 | The second preferred address available for use for the function “Off Board Diagnostic-Service Tool”. It should only be used by the “second” Off Board Diagnostic-Service Tool (Function 129, Industry Group 0, Function Instance 1, ECU Instance 0). | | |
| 37 | Off Vehicle Gateway | General gateway controller (off board to on board) that may include, but not limited to, an Electric Vehicle Communication Controller (EVCC). | | |
| 63 | Oil Sensor | | ||
| 1 | 164 | On Board Diagnostic Unit #2 | Controller used to report On Board Diagnostics | |
| 251 | On-Board Data Logger | | ||
| 43 | On-Board Diagnostic Unit | | ||
| 2 | 246 | Operator Controls - Machine Specific | Non auxiliary operator control inputs | |
| 1 | 206 | Other Trailer #1 Devices | Recommended address space for subnetwork devices | |
| 1 | 207 | Other Trailer #1 Devices | Recommended address space for subnetwork devices | |
| 1 | 198 | Other Trailer #2 Devices | Recommended address space for subnetwork devices | |
| 1 | 199 | Other Trailer #2 Devices | Recommended address space for subnetwork devices | |
| 1 | 190 | Other Trailer #3 Devices | Recommended address space for subnetwork devices | |
| 1 | 191 | Other Trailer #3 Devices | Recommended address space for subnetwork devices | |
| 1 | 182 | Other Trailer #4 Devices | Recommended address space for subnetwork devices | |
| 1 | 183 | Other Trailer #4 Devices | Recommended address space for subnetwork devices | |
| 1 | 174 | Other Trailer #5 Devices | Recommended address space for subnetwork devices | |
| 1 | 175 | Other Trailer #5 Devices | Recommended address space for subnetwork devices | |
| 80 | Parking brake controller | Module controlling the parking brake | | |
| 25 | Passenger-Operator Climate Control #1 | The first climate control - may only be used for the NAME Function of 21, Function Instance 0, and an ecu instance of 0, and must be associated with the driver (operator) climate control, when there are multiple climate control systems. | | |
| 58 | Passenger-Operator Climate Control #2 | The second SA available for climate control - must be associated with the passenger climate control (NAME Function of 21, function instance 1, and an ecu instance of 0), when there are multiple climate control systems. If only one climate control system then may be used for the second ecu of the climate control (Function 21, Function Instance 0, ECU Instance of 1). | | |
| 48 | Pneumatic - System Controller | | ||
| 2 | 239 | Position Control | Multiple axis position control of a devices movable device elements | |
| 91 | Power Systems Manager | This controller application will be used to manage one or more power systems. It might exist in an ECU with no other controller applications, or it might exist in an ECU with multiple controller applications | | |
| 36 | Power TakeOff (Front or Secondary) | | ||
| 7 | Power TakeOff - (Main or Rear) | | ||
| 90 | Powertrain Control Module | Electronic control module in charge of controlling and coordinating the operation of a hybrid propulsion system. | | |
| 2 | 243 | Product Loss Monitoring | Monitoring of the amount of produce being lost from e.g. a harvesting process | |
| 2 | 244 | Product Moisture Sensing | Monitoring of the produce moisture content | |
| 73 | Propulsion Battery Charger | A device used to charge propulsion batteries in an electric vehicle from an off-board source of electrical energy. | | |
| 4 | 228 | Propulsion Sensor Hub & Gateway #1 | The first device that interfaces with propulsion sensors and acts as a gateway to other networks in the system. | |
| 4 | 229 | Propulsion Sensor Hub & Gateway #2 | The second device that interfaces with propulsion sensors and acts as a gateway to other networks in the system. | |
| 4 | 230 | Propulsion Sensor Hub & Gateway #3 | The third device that interfaces with propulsion sensors and acts as a gateway to other networks in the system. | |
| 4 | 231 | Propulsion Sensor Hub & Gateway #4 | The fourth device that interfaces with propulsion sensors and acts as a gateway to other networks in the system. | |
| 4 | 237 | Protection System for Marine Engines | The first ecu that controls the Protection functions on the first engine of a Marine System. | |
| 66 | Ramp Control | Control of ramps, lifts, or tailgates | | |
| 56 | Rear Axle Steering Controller #1 | | ||
| 1 | 165 | Rear Steering Axle Controller #2 | Rear steering controller 2 for axle group | |
| 1 | 166 | Rear Steering Axle Controller #3 | Rear steering controller 3 for axle group | |
| 252 | Reserved for Experimental Use | | ||
| 253 | Reserved for OEM | | ||
| 16 | Retarder - Driveline | | ||
| 15 | Retarder - Engine | Engine Compression Braking | | |
| 41 | Retarder, Exhaust, Engine #1 | The first engine exhaust retarder - may only be used for the NAME Function of 12, Function Instance 0, and an ecu instance of 0. | | |
| 44 | Retarder, Exhaust, Engine #2 | The second PA available for use for the function, engine exhaust retarder. It may be used by the “second” engine’s exhaust retarder (Function 12, Function Instance 1, ECU Instance 0), but in cases without a second engine it may also be used by the second exhaust retarder on the first engine or by the second ecu on the first exhaust retarder on the first engine (Function 12, Function Instance 0, ECU Instance 1). | | |
| 1 | 159 | Roadway Information System | Controller applications that use this source address will provide information relevant to the roadway in which the vehicle is traveling. This includes items such as intersections, grade, speed limit, number of lanes, location of fueling stations, etc. The roadway refers to the current road that the vehicle is traveling, nearby roads that may intersect the road, and possibly information for a specific route._x000D_ _x000D_ This is different from "Vehicle Navigation" (Source Address 28) because a vehicle navigation device may use the information provided by the device with the "Roadway Information" source address for its purposes. These functions could be accomplished by two completely different devices. | |
| 3 | 224 | Rotation Sensor | A device that measures the rotational angle around an axis. | |
| 83 | Safety Restraint System | The safety restraint system can be for controlling activation of airbags, belt tensioners, roll over protection systems, etc. | | |
| 88 | Safety Restraint System #2 | The second safety restraint system that can be for controlling activation of airbags, belt tensioners, roll over protection systems, etc. | | |
| 54 | Seat Control #1 | The first seat control module - may only be used for the NAME Function of 40, Function Instance 0, and an ecu instance of 0, and must be associated with the driver seat, when there are multiple seats with separate controls. | | |
| 79 | Seat Control #2 | The second PA available for seat controls - must be associated with the passenger seat (NAME Function of 40, Function Instance 1, and an ecu instance of 0), when there are multiple seats with separate controls. If only one seat then may be used for the second ecu of the seat control (Function 40, Function Instance 0, ECU Instance of 1). | | |
| 2 | 238 | Sequence Controller | The master in the Sequence Control System as defined in ISO11783-14 | |
| 5 | Shift Console - Primary | The shift console mounted in the normal drivers position | | |
| 6 | Shift Console - Secondary | A shift console mounted remotely from the normal drivers position (May not be used for any ecu instances of the primary shift console) | | |
| 3 | 233 | Single Land Leveling System Operator Interface | A component that allows the user to control the Land Leveling System and display information about the operation of the system. | |
| 3 | 231 | Single Land Leveling System Supervisor | This device is the Land Leveling System Supervisor for a single control loop. | |
| 1 | 162 | Slope Sensor | A device that measures the slope along an axis. | |
| 3 | 226 | Slope Sensor | A device that measures the slope along an axis. | |
| 31 | Starter System | | ||
| 77 | Steering Column Unit | Device that gathers the operator inputs from switches/levers/etc located in and/or around the steering wheel/column | | |
| 19 | Steering Controller | | ||
| 1 | 228 | Steering Input Unit | May be used for measuring steering angle, steering torsion, steering force feedback, etc. | |
| 3 | 235 | Supplemental Sensor Processing Unit #1 | | |
| 5 | 235 | Supplemental Sensor Processing Unit #1 | | |
| 3 | 236 | Supplemental Sensor Processing Unit #2 | | |
| 5 | 236 | Supplemental Sensor Processing Unit #2 | | |
| 3 | 237 | Supplemental Sensor Processing Unit #3 | | |
| 5 | 237 | Supplemental Sensor Processing Unit #3 | | |
| 3 | 238 | Supplemental Sensor Processing Unit #4 | | |
| 5 | 238 | Supplemental Sensor Processing Unit #4 | | |
| 3 | 239 | Supplemental Sensor Processing Unit #5 | | |
| 5 | 239 | Supplemental Sensor Processing Unit #5 | | |
| 3 | 240 | Supplemental Sensor Processing Unit #6 | | |
| 5 | 240 | Supplemental Sensor Processing Unit #6 | | |
| 95 | Supply Equipment Communication Controller (SECC) | Typically part of an Electrical Vehicle Supply Equipment (EVSE) in an electric vehicle charging station. | | |
| 21 | Suspension - Drive Axle #1 | The suspension on the first drive axle - may only be used for the NAME Function of 18, Function Instance 0, and an ecu instance of 0. | | |
| 22 | Suspension - Drive Axle #2 | The second PA available for use for the function, suspension on drive axle. It may be used by the “second” drive axle’s suspension system (Function 18, Function Instance 1, ECU Instance 0), but when there is no second drive axle it may be used by the second ecu on the first drive axle’s suspension (Function 18, Function Instance 0, ECU Instance 1). | | |
| 20 | Suspension - Steer Axle | | ||
| 47 | Suspension - System Controller #1 | The first Suspension - System Controller - may only be used for the NAME Function of 35, Function Instance 0, and an ecu instance of 0. | | |
| 64 | Suspension - System Controller #2 | | ||
| 1 | 238 | Tachograph | | |
| 2 | 241 | Tailings Monitoring | Monitoring of the quantity of unthreshed material returned to threshing machine | |