SPNs
To search a certain item enter you search-text into the input field and press return.
You may optionally enter a comparison operator (<, <=, >, >=, <>
or =) at the beginning of each of your search values to specify how the comparison should be done.
Displaying 7801-7900 of 15977 results.
| SPN | SP Name | |
|---|---|---|
| 11046 | HVESP1 Charge Power Limit Due to Battery Diagnostic Condition | ![]() |
| 11047 | HVESP1 Charge Power Limit Due to Battery or Cell Voltage | ![]() |
| 11048 | HVESP1 Charge Power Limit Due to Battery Current | ![]() |
| 11049 | HVESP1 Charge Power Limit Due to an Undefined Cause | ![]() |
| 11050 | HVESP1 Available Discharge Power | ![]() |
| 11051 | HVESP1 Available Charge Power | ![]() |
| 11052 | HVESP1 Voltage Level | ![]() |
| 11053 | HVESP1 Current | ![]() |
| 11054 | HVESP1 Fast Update State of Charge | ![]() |
| 11055 | HVESP1 Highest Cell Voltage | ![]() |
| 11056 | HVESP1 Lowest Cell Voltage | ![]() |
| 11057 | HVESP1 Cell Voltage Differential Status | ![]() |
| 11058 | HVESP1 Highest Cell Temperature | ![]() |
| 11059 | HVESP1 Lowest Cell Temperature | ![]() |
| 11060 | HVESP1 Average Cell Temperature | ![]() |
| 11061 | HVESP1 Cell Temperature Differential Status | ![]() |
| 11062 | HVESP1 Discharge Capacity | ![]() |
| 11063 | HVESP1 Charge Capacity | ![]() |
| 11064 | HVESP1 Cell Balancing Count | ![]() |
| 11065 | HVESP1 Maximum Instantaneous Discharge Current Limit | ![]() |
| 11066 | HVESP1 Maximum Instantaneous Charge Current Limit | ![]() |
| 11067 | HVESP1 Lowest Cell State of Charge | ![]() |
| 11068 | HVESP1 Highest Cell State of Charge | ![]() |
| 11069 | HVESP1 Bus Voltage | ![]() |
| 11070 | HVESP1 Ignition Voltage | ![]() |
| 11071 | HVESP1 Intake Coolant Temperature | ![]() |
| 11072 | HVESP1 Outlet Coolant Temperature | ![]() |
| 11073 | HVESP1 Electronics Temperature | ![]() |
| 11074 | HVESP1 Temperature | ![]() |
| 11075 | HVESP1 High-Voltage Bus (Positive) Contactor State | ![]() |
| 11076 | HVESP1 High-Voltage Bus (Negative) Contactor State | ![]() |
| 11077 | HVESP1 High-Voltage Bus Disconnect Forewarning | ![]() |
| 11078 | HVESP1 High-Voltage Bus Pre-Charge Relay State | ![]() |
| 11079 | HVESP1 Center of Pack Contactor State | ![]() |
| 11080 | HVESP1 High-Voltage Bus Active Isolation Test Status | ![]() |
| 11081 | HVESP1 High-Voltage Bus Passive Isolation Test Status | ![]() |
| 11082 | HVESP1 HVIL Status | ![]() |
| 11083 | HVESP1 Inertia Switch Status | ![]() |
| 11084 | HVESP1 State of Charge Status | ![]() |
| 11085 | HVESP1 Cell Balance Status | ![]() |
| 11086 | HVESP1 Cell Balancing Active | ![]() |
| 11087 | HVESP1 Internal Charger Status | ![]() |
| 11088 | HVESP1 High-Voltage Bus Connection Status | ![]() |
| 11089 | HVESP1 Operational Status | ![]() |
| 11090 | HVESP1 Discharge Energy Capacity | ![]() |
| 11091 | HVESP1 Charge Energy Capacity | ![]() |
| 11092 | HVESP1 Maximum Charge Voltage Limit | ![]() |
| 11093 | HVESP1 Module 1 Operational Status | ![]() |
| 11094 | HVESP1 Module 2 Operational Status | ![]() |
| 11095 | HVESP1 Module 3 Operational Status | ![]() |
| 11096 | HVESP1 Module 4 Operational Status | ![]() |
| 11097 | HVESP1 Module 5 Operational Status | ![]() |
| 11098 | HVESP1 Module 6 Operational Status | ![]() |
| 11099 | HVESP1 Module 7 Operational Status | ![]() |
| 11100 | HVESP1 Module 8 Operational Status | ![]() |
| 11101 | HVESP1 Module 9 Operational Status | ![]() |
| 11102 | HVESP1 Module 10 Operational Status | ![]() |
| 11103 | HVESP1 Module 11 Operational Status | ![]() |
| 11104 | HVESP1 Module 12 Operational Status | ![]() |
| 11105 | HVESP1 Module 13 Operational Status | ![]() |
| 11106 | HVESP1 Module 14 Operational Status | ![]() |
| 11107 | HVESP1 Module 15 Operational Status | ![]() |
| 11108 | HVESP1 Module 16 Operational Status | ![]() |
| 11109 | HVESP1 Thermal Management System SLI Input Power | ![]() |
| 11110 | HVESP1 Thermal Management System High-Voltage Input Power | ![]() |
| 11111 | HVESP1 Thermal Management System Compressor Speed | ![]() |
| 11112 | HVESP1 Thermal Management System Relative Humidty | ![]() |
| 11113 | HVESP1 Thermal Management System Heater Status | ![]() |
| 11114 | HVESP1 Thermal Management System Mode | ![]() |
| 11115 | HVESP1 Highest Cell Voltage Module Number | ![]() |
| 11116 | HVESP1 Highest Cell Voltage Cell Number | ![]() |
| 11117 | HVESP1 Lowest Cell Voltage Module Number | ![]() |
| 11118 | HVESP1 Lowest Cell Voltage Cell Number | ![]() |
| 11119 | HVESP1 Average Cell Voltage | ![]() |
| 11120 | HVESP1 Highest Cell Temperature Module Number | ![]() |
| 11121 | HVESP1 Highest Cell Temperature Cell Number | ![]() |
| 11122 | HVESP1 Lowest Cell Temperature Module Number | ![]() |
| 11123 | HVESP1 Lowest Cell Temperature Cell Number | ![]() |
| 11124 | HVESP1 Highest Cell State of Charge Module Number | ![]() |
| 11125 | HVESP1 Highest Cell State of Charge Cell Number | ![]() |
| 11126 | HVESP1 Lowest Cell State of Charge Module Number | ![]() |
| 11127 | HVESP1 Lowest Cell State of Charge Cell Number | ![]() |
| 11128 | HVESP1 High-Voltage Bus Active Isolation Test Results | ![]() |
| 11129 | HVESP1 High-Voltage Bus Passive Isolation Test Results | ![]() |
| 11130 | HVESP1 Bus Voltage Negative to Chassis Ground Voltage | ![]() |
| 11131 | HVESP1 Voltage Level Negative to Chassis Ground Voltage | ![]() |
| 11132 | HVESP1 Nominal Voltage | ![]() |
| 11133 | HVESP1 Recommended Minimum Operating Voltage | ![]() |
| 11134 | HVESP1 Recommended Maximum Operating Voltage | ![]() |
| 11135 | HVESP1 Recommended Minimum State Of Charge | ![]() |
| 11136 | HVESP1 Recommended Maximum State Of Charge | ![]() |
| 11137 | HVESP1 Recommended Maximum Operating Temperature | ![]() |
| 11138 | HVESP1 Recommended Minimum Operating Temperature | ![]() |
| 11139 | HVESP1 Cell Maximum Voltage Limit | ![]() |
| 11140 | HVESP1 Cell Minimum Voltage Limit | ![]() |
| 11141 | HVESP1 State of Health | ![]() |
| 11142 | HVESP1 Contactor Open Under Load Count | ![]() |
| 11143 | HVESP1 Total Energy Throughput | ![]() |
| 11144 | HVESP1 Total Accumulated Charge | ![]() |
| 11145 | HVESP2 High-Voltage Bus Connect Command | ![]() |
