List DDEntity

Displaying 101-200 of 546 results.
101 - Setpoint Bale Width View details | Request changes
Definition: Setpoint Bale Width for square baler or round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
102 - Actual Bale Width View details | Request changes
Definition: Actual Bale Width for square baler or round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
103 - Default Bale Width View details | Request changes
Definition: Default Bale Width for square baler or round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
104 - Minimum Bale Width View details | Request changes
Definition: Minimum Bale Width for square baler or round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
105 - Maximum Bale Width View details | Request changes
Definition: Maximum Bale Width for square baler or round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
106 - Setpoint Bale Height View details | Request changes
Definition: Setpoint Bale Height is only applicable to square baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
107 - ActualBaleHeight View details | Request changes
Definition: Actual Bale Height is only applicable to square baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
108 - Default Bale Height View details | Request changes
Definition: Default Bale Height is only applicable to square baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
109 - Minimum Bale Height View details | Request changes
Definition: Minimum Bale Height is only applicable to square baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
110 - Maximum Bale Height View details | Request changes
Definition: Maximum Bale Height is only applicable to square baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
111 - Setpoint Bale Size View details | Request changes
Definition: Setpoint Bale Size as length for a square baler or diameter for a round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
112 - Actual Bale Size View details | Request changes
Definition: Actual Bale Size as length for a square baler or diameter for a round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
113 - Default Bale Size View details | Request changes
Definition: Default Bale Size as length for a square baler or diameter for a round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
114 - Minimum Bale Size View details | Request changes
Definition: Minimum Bale Size as length for a square baler or diameter for a round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
115 - Maximum Bale Size View details | Request changes
Definition: Maximum Bale Size as length for a square baler or diameter for a round baler
Unit Symbol: mm
Typically used by Device Class(es): 9 - Forage harvester
116 - Total Area View details | Request changes
Definition: Accumulated Area
Unit Symbol:
Typically used by Device Class(es): 0 - Non-specific system
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
15 - Municipal Work
117 - Effective Total Distance View details | Request changes
Definition: Accumulated Distance in working position
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
118 - Ineffective Total Distance View details | Request changes
Definition: Accumulated Distance out of working position
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
119 - Effective Total Time View details | Request changes
Definition: Accumulated Time in working position
Unit Symbol: s
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
17 - Sensor System
120 - Ineffective Total Time View details | Request changes
Definition: Accumulated Time out of working position
Unit Symbol: s
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
121 - Product Density Mass Per Volume View details | Request changes
Definition: Product Density as mass per volume
Unit Symbol: mg/l
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
122 - Product Density Mass PerCount View details | Request changes
Definition: Product Density as mass per count
Unit Symbol: mg/1000
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
123 - Product Density Volume Per Count View details | Request changes
Definition: Product Density as volume per count
Unit Symbol: ml/1000
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
124 - Auxiliary Valve Scaling Extend View details | Request changes
Definition: Factor to apply to AuxValveCommand PortFlowCommand. The scaling of the port flow relates to flow, not to spool position, although the position of the spool is of course indirectly affected.
Unit Symbol: %
Typically used by Device Class(es): - Not Assigned
125 - Auxiliary Valve Scaling Retract View details | Request changes
Definition: Factor to apply to AuxValveCommand PortFlowCommand. The scaling of the port flow relates to flow, not to spool position, although the position of the spool is of course indirectly affected.
Unit Symbol: %
Typically used by Device Class(es): - Not Assigned
126 - Auxiliary Valve Ramp Extend Up View details | Request changes
Definition: The valve will apply a ramp to the Auxiliary ValveCommand PortFlowCommand, to limit the acceleration or deceleration of flow. The valve must apply the ramp to create a liniear increase/decrease of flow over time.
Unit Symbol: ms
Typically used by Device Class(es): - Not Assigned
127 - Auxiliary Valve Ramp Extend Down View details | Request changes
Definition: The valve will apply a ramp to the Auxiliary ValveCommand PortFlowCommand, to limit the acceleration or deceleration of flow. The valve must apply the ramp to create a liniear increase/decrease of flow over time.
Unit Symbol: ms
Typically used by Device Class(es): - Not Assigned
128 - Auxiliary Valve Ramp Retract Up View details | Request changes
Definition: The valve will apply a ramp to theAuxiliary ValveCommand PortFlowCommand, to limit the acceleration or deceleration of flow. The valve must apply the ramp to create a liniear increase/decrease of flow over time.
Unit Symbol: ms
Typically used by Device Class(es): - Not Assigned
129 - Auxiliary Valve Ramp Retract Down View details | Request changes
Definition: The valve will apply a ramp to the Auxiliary ValveCommand PortFlowCommand, to limit the acceleration or deceleration of flow. The valve must apply the ramp to create a liniear increase/decrease of flow over time.
Unit Symbol: ms
Typically used by Device Class(es): - Not Assigned
130 - Auxiliary Valve Float Threshold View details | Request changes
Definition: Safety function. Current output of valve must be above threshold before float command is allowed.
Unit Symbol: %
Typically used by Device Class(es): - Not Assigned
131 - Auxiliary Valve Progressivity Extend View details | Request changes
Definition: Define non-linear releationship between command and flow by 2nd degree polynomium. (I will get polynomium)
Unit Symbol: n.a.
Typically used by Device Class(es): - Not Assigned
132 - Auxiliary Valve Progressivity Retract View details | Request changes
Definition: Define non-linear releationship between command and flow by 2nd degree polynomium. (I will get polynomium)
Unit Symbol: n.a.
Typically used by Device Class(es): - Not Assigned
133 - Auxiliary Valve Invert Ports View details | Request changes
Definition: Tell valve to swap extend and retract ports, easier than redoing plumbing on valve
Unit Symbol: n.a.
Typically used by Device Class(es): - Not Assigned
134 - Device Element Offset X View details | Request changes
Definition: X direction offset of a DeviceElement relative to a Device.
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
135 - Device Element Offset Y View details | Request changes
Definition: Y direction offset of a DeviceElement relative to a Device.
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
136 - Device Element Offset Z View details | Request changes
Definition: Z direction offset of a DeviceElement relative to a Device.
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
137 - Device Volume Capacity View details | Request changes
Definition: DeviceElement Volume Capacity, dimension of a DeviceElement
Unit Symbol: ml
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
138 - Device Mass Capacity View details | Request changes
Definition: DeviceElement Mass Capacity, dimension of a DeviceElement
Unit Symbol: g
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
139 - Device Count Capacity View details | Request changes
Definition: DeviceElement Count Capacity, dimension of a DeviceElement
Unit Symbol: #
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
140 - Setpoint Percentage Application Rate View details | Request changes
Definition: Application Rate expressed as percentage
Unit Symbol: ppm
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
10 - Irrigation
141 - Actual Work State View details | Request changes
Definition: Actual Work State, 2 bits defined as 00=disabled/off, 01=enabled/on, 10=error, 11=undefined/not installed
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
142 - Physical Setpoint Time Latency View details | Request changes
Definition: The Setpoint Value Latency Time is the time lapse between the moment of receival of a setpoint value command by the working set and the moment this setpoint value is physically applied on the device. That means if the setpoint value is communicated on the network (CAN bus) but the system needs 2 seconds to adjust the value physically on the desired unit (device element) then the Setpoint Latency Time is 2 seconds. The setpoint time latency value can only be positive.
Unit Symbol: ms
Typically used by Device Class(es): 2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
143 - Physical Actual Value Time Latency View details | Request changes
Definition: The Actual Value Latency Time is the time lapse between the moment this actual value is communicated to the Task Controller, and the moment that this actual value is physically applied on the device. That means if the system needs 2 seconds to calculate or measure a value before communicating it on the network, then the Actual Latency Time value is minus 2 seconds. Depending of the system characteristics the latency time could be negative or positive. In case where the system communicates an actual value before the actual value has been physically applied the latency value should be positive. In case where the system communicates an actual value after the actual value has been physically applied the latency value should be negative.
Unit Symbol: ms
Typically used by Device Class(es): 2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
144 - Yaw Angle View details | Request changes
Definition: Pivot / Yaw Angle of a DeviceElement
Unit Symbol: °
Typically used by Device Class(es):
145 - Roll Angle View details | Request changes
Definition: Roll Angle of a DeviceElement
Unit Symbol: °
Typically used by Device Class(es):
146 - Pitch Angle View details | Request changes
Definition: Pitch Angle of a DeviceElement
Unit Symbol: °
Typically used by Device Class(es):
147 - Log Count View details | Request changes
Definition: Log Counter, may be used to control data log record generation on a Task Controller
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
148 - Total Fuel Consumption View details | Request changes
Definition: Accumulated Fuel Consumption as Counter
Unit Symbol: ml
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
149 - Instantaneous Fuel Consumption per Time View details | Request changes
Definition: Fuel consumption per time
Unit Symbol: mm³/s
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
150 - Instantaneous Fuel Consumption per Area View details | Request changes
Definition: Fuel consumption per area
Unit Symbol: mm³/m²
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
151 - Instantaneous Area Per Time Capacity View details | Request changes
Definition: Area per time capacity
Unit Symbol: mm²/s
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
153 - Actual Normalized Difference Vegetative Index (NDVI) View details | Request changes
Definition: The Normalized Difference Vegetative Index (NDVI) computed from crop reflectances as the difference between NIR reflectance in the 780 to 880 nm band and red reflectance in the 640 to 680 nm band divided by the sum of the NIR and red reflectance in the same bands.
Unit Symbol: n.a.
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
10 - Irrigation
154 - Physical Object Length View details | Request changes
Definition: Length of device element (dimension along the X-axis)
Unit Symbol: mm
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
155 - Physical Object Width View details | Request changes
Definition: Width of device element (dimension along the Y-axis)
Unit Symbol: mm
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
156 - Physical Object Height View details | Request changes
Definition: Height of device element (dimension along the Z-axis)
Unit Symbol: mm
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
157 - Connector Type View details | Request changes
Definition: Specification of the type of coupler. The value definitions are: 0 = unknown (default), 1 = ISO 6489-3 Tractor drawbar, 2 = ISO 730 Three-point-hitch semi-mounted, 3 = ISO 730 Three-point-hitch mounted, 4 = ISO 6489-1 Hitch-hook, 5 = ISO 6489-2 Clevis coupling 40, 6 = ISO 6489-4 Piton type coupling, 7 = ISO 6489-5 CUNA hitch, or ISO 5692-2 Pivot wagon hitch 8 = ISO 24347 Ball type hitch 9 = Chassis Mounted - Self-Propelled All other values are reserved for future assignments.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
158 - Prescription Control State View details | Request changes
Definition: Defines and synchronise the actual state of the prescription system. The state is represented by the lowest significant 2 bits in the lowest significant byte of the process data value: Byte 1: bit 0-1: 00 = manual/off, 01 = auto/on, 10 = error indicator, 11 = undefined/not installed. bits 2-7: reserved set to 0. Byte 2-4: reserved set to 0. The DDI shall support the On Change trigger so that the TC is able to get informed when the value gets changed by the Working Set Master. The TC shall active this trigger when using the DDI. See attachment for more information
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
159 - Number of Sub-Units per Section View details | Request changes
Definition: Specifies the number of sub-units for a section (e.g. number of nozzles per sprayer section or number of planter row units per metering device).
Unit Symbol: #
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
160 - Section Control State View details | Request changes
Definition: Specifies the actual state of section control. The value definitions are: Byte 1 (bitfield) Bit 0-1: 00 = manual/off, 01 = auto/on, 10 = error indicator, 11 = undefined/not installed. Bits 2-7: reserved, set to 0. Bytes 2-4: reserved, set to 0. The DDI shall support the On Change trigger so that the TC is able to get informed when the value gets changed by the Working Set Master. The TC shall active this trigger when using the DDI. See attachment for more information
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
161 - Actual Condensed Work State (1-16) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 1 to 16 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
162 - Actual Condensed Work State (17-32) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 17 to 32 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
163 - Actual Condensed Work State (33-48) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 33 to 48 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
164 - Actual Condensed Work State (49-64) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 49 to 64 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
165 - Actual Condensed Work State (65-80) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 65 to 80 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
166 - Actual Condensed Work State (81-96) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 81 to 96 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
167 - Actual Condensed Work State (97-112) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 97 to 112 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
168 - Actual Condensed Work State (113-128) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 113 to 128 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
169 - Actual Condensed Work State (129-144) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 129 to 144 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, tthen he device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
170 - Actual Condensed Work State (145-160) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 145 to 160 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
171 - Actual Condensed Work State (161-176) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 161 to 176 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
172 - Actual Condensed Work State (177-192) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 177 to 192 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
173 - Actual Condensed Work State (193-208) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 193 to 208 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
174 - Actual Condensed Work State (209-224) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 209 to 224 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
175 - Actual Condensed Work State (225-240) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 225 to 240 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
176 - Actual Condensed Work State (241-256) View details | Request changes
Definition: Combination of the actual work states of individual sections or units (e.g. nozzles) number 241 to 256 into a single actual work state of their parent device element. The actual condensed work state contains the child element actual work states, in the driving direction from left to right, where the leftmost child element actual work state are the 2 lowest significant bits of the Process Data Value. Each child device elements actual work state is represented by 2 bits and defined as: 00 = disabled/off, 01 = enabled/on, 10 = error indicator, 11 = undefined/not installed. In total 16 child device element actual work states can be contained in one actual condensed work state of their parent device element. If less than 16 child device element actual work states are available, then the unused bits shall be set to value 11 (not installed). When the parent device element contains the Actual Condensed Work State DDE, then the device descriptor shall not contain the individual actual work state DDEs of the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
177 - Actual length of cut View details | Request changes
Definition: Actual length of cut for harvested material, e.g. Forage Harvester or Tree Harvester.
Unit Symbol: mm
Typically used by Device Class(es): 0 - Non-specific system
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
178 - Element Type Instance View details | Request changes
Definition: This DDI is used to enumerate and identify multiple device elements (DET) of the same type within one Device Description object pool. The value of this DDI is independent of the DET number. The combination of device element type and value of Element Type Instance ETI represents a unique object inside the device description object pool and therefore shall exist only once per object pool. Recommendation: The definition of the device elements should be made from left to right direction or from front to back direction. When in a matrix, count left-to-right first, then front-to-back and at last top-to-bottom. See attachment for more information.
Unit Symbol: n.a.
Typically used by Device Class(es): - Not Assigned
179 - Actual Cultural Practice View details | Request changes
Definition: This DDI is used to define the current cultural practice which is performed by an individual device operation. For instance a planter/seeder could provide a sowing and a fertilizing operation at the same time. The cultural practice value definitions are: 0=Unknown, 1=Fertilizing, 2=Sowing and Planting, 3=Crop Protection, 4=Tillage, 5=Baling, 6=Mowing, 7=Wrapping, 8=Harvesting, 9=Forage Harvesting, 10=Transport, 11=Swathing, 12=Slurry/Manure Application, 13=Self-Loading Wagon, 14=Tedding, 15-255=Reserved for future Assignment See attachment for more information.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
180 - Device Reference Point (DRP) to Ground distance View details | Request changes
Definition: This DDI is used to specify the distance from the Device Reference Point (DRP) down to the ground surface. The DRP to Ground DDI shall be attached only to the Device Element (DET) with element number zero.
Unit Symbol: mm
Typically used by Device Class(es):
181 - Dry Mass Per Area Yield View details | Request changes
Definition: Actual Dry Mass Per Area Yield. The definition of dry mass is the mass with a reference moisture specified by DDI 184.
Unit Symbol: mg/m²
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
182 - Dry Mass Per Time Yield View details | Request changes
Definition: Actual Dry Mass Per Time Yield. The definition of dry mass is the mass with a reference moisture specified by DDI 184.
Unit Symbol: mg/s
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
183 - Yield Total Dry Mass View details | Request changes
Definition: Accumulated Yield specified as dry mass. The definition of dry mass is the mass with a reference moisture specified by DDI 184.
Unit Symbol: kg
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
184 - Reference Moisture For Dry Mass View details | Request changes
Definition: Moisture percentage used for the dry mass DDIs 181, 182 and 183.
Unit Symbol: ppm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
185 - Seed Cotton Mass Per Area Yield View details | Request changes
Definition: Seed cotton yield as mass per area, not corrected for a possibly included lint percantage.
Unit Symbol: mg/m²
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
186 - Lint Cotton Mass Per Area Yield View details | Request changes
Definition: Lint cotton yield as mass per area.
Unit Symbol: mg/m²
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
187 - Seed Cotton Mass Per Time Yield View details | Request changes
Definition: Seed cotton yield as mass per time, not corrected for a possibly included lint percantage.
Unit Symbol: mg/s
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
188 - Lint Cotton Mass Per Time Yield View details | Request changes
Definition: Lint cotton yield as mass per time.
Unit Symbol: mg/s
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
189 - Yield Total Seed Cotton Mass View details | Request changes
Definition: Accumulated yield specified as seed cotton mass, not corrected for a possibly included lint percantage.
Unit Symbol: kg
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
190 - Yield Total Lint Cotton Mass View details | Request changes
Definition: Accumulated yield specified as lint cotton mass.
Unit Symbol: kg
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
191 - Lint Turnout Percentage View details | Request changes
Definition: Percent of lint in the seed cotton.
Unit Symbol: ppm
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
192 - Ambient temperature View details | Request changes
Definition: Ambient temperature measured by a machine. Unit is milli-Kelvin (mK).
Unit Symbol: mK
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
193 - Setpoint Product Pressure View details | Request changes
Definition: Setpoint Product Pressure to adjust the pressure of the product flow system at the point of dispensing.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
194 - Actual Product Pressure View details | Request changes
Definition: Actual Product Pressure is the measured pressure in the product flow system at the point of dispensing.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
195 - Minimum Product Pressure View details | Request changes
Definition: Minimun Product Pressure in the product flow system at the point of dispensing.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
196 - Maximum Product Pressure View details | Request changes
Definition: Maximum Product Pressure in the product flow system at the point of dispensing.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
197 - Setpoint Pump Output Pressure View details | Request changes
Definition: Setpoint Pump Output Pressure to adjust the pressure at the output of the solution pump.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
198 - Actual Pump Output Pressure View details | Request changes
Definition: Actual Pump Output Pressure measured at the output of the solution pump.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
199 - Minimum Pump Output Pressure View details | Request changes
Definition: Minimum Pump Output Pressure for the output pressure of the solution pump.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
200 - Maximum Pump Output Pressure View details | Request changes
Definition: Maximum Pump Output Pressure for the output pressure of the solution pump.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
201 - Setpoint Tank Agitation Pressure View details | Request changes
Definition: Setpoint Tank Agitation Pressure to adjust the pressure for a stir system in a tank.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops