List DDEntity

Version: 2024041701
Displaying 201-300 of 723 results.
202 - Actual Tank Agitation Pressure View details | Request changes
Definition: Actual Tank Agitation Pressure measured by the tank stir system.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
Bit Resolution: 0,1
203 - Minimum Tank Agitation Pressure View details | Request changes
Definition: Minimun Tank Agitation Pressure for a stir system in a tank.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
Bit Resolution: 0,1
204 - Maximum Tank Agitation Pressure View details | Request changes
Definition: Maximun Tank Agitation Pressure for a stir system in a tank.
Unit Symbol: Pa
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
Bit Resolution: 0,1
205 - SC Setpoint Turn On Time View details | Request changes
Definition: The Section Control Turn On Time defines the overall time lapse between the moment the TC sends a turn on section command to the working set and the moment this section is physically turned on and the product is applied. The working set may support this DDE as an optional feature to provide the possibility to store the time settings direct on the device to make the settings available after a power cycle. Therefore this DDE needs always to be setable by the TC and shall not be used to change any working set system behavior. The DDI shall support the On Change trigger so that the TC is able to get informed when the value gets changed by the Working Set Master. The TC shall active this trigger when using the DDI.
Unit Symbol: ms
Typically used by Device Class(es): 0 - Non-specific system
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
Bit Resolution: 1
206 - SC Setpoint Turn Off Time View details | Request changes
Definition: The Section Control Turn Off Time defines the overall time lapse between the moment the TC sends a turn off section command to the working set and the moment this section is physically turned off. The working set may support this DDE as an optional feature to provide the possibility to store the time settings direct on the device to make the settings available after a power cycle. Therefore this DDE needs always to be setable by the TC and shall not be used to change any working set system behavior. The DDI shall support the On Change trigger so that the TC is able to get informed when the value gets changed by the Working Set Master. The TC shall active this trigger when using the DDI.
Unit Symbol: ms
Typically used by Device Class(es): 0 - Non-specific system
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
Bit Resolution: 1
207 - Wind speed View details | Request changes
Definition: Wind speed measured in the treated field at the beginning of operations or on the application implement during operations. Measurements at to be made at 2m height or 1 m over the canopy in tree and bush crops. On implements the wind speed needs to be compansated by implement true ground speed and heading.
Unit Symbol: mm/s
Typically used by Device Class(es): 1 - Tractor
5 - Fertilizer
6 - Sprayers
10 - Irrigation
14 - Special Crops
17 - Sensor System
Bit Resolution: 1
208 - Wind direction View details | Request changes
Definition: Wind direction measured in the treated field at the beginning of operations or on the application implement during operations. Measurements at to be made at 2m height or 1 m over the canopy in tree and bush crops. On implements the wind direction needs to be compansated by implement true ground speed and heading.
Unit Symbol: °
Typically used by Device Class(es): 1 - Tractor
5 - Fertilizer
6 - Sprayers
10 - Irrigation
14 - Special Crops
17 - Sensor System
Bit Resolution: 1
209 - Relative Humidity View details | Request changes
Definition: Ambient humidty measured by a weather station in a treated field or on the application implement.
Unit Symbol: %
Typically used by Device Class(es): 1 - Tractor
5 - Fertilizer
6 - Sprayers
7 - Harvesters
9 - Forage harvester
10 - Irrigation
14 - Special Crops
17 - Sensor System
Bit Resolution: 1
210 - Sky conditions View details | Request changes
Definition: This DDE is used to define the current sky conditions during operation. The METAR format and its abbrivations is used as follows to define the sky conditions: CLR=Clear, NSC=Mostly Sunny, FEW=Partly Sunny, SCT=Partly cloud, BKN=Mostly cloudy, OVC=overcast/cloudy 1. Byte = first character 2. Byte = second character 3. Byte = third character 4. Byte = fourt character Unused bytes shall be set to 0x20 Byte 1 to 4 set to 0x00 = error Byte 1 to 4 set to 0xFF = not available
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
5 - Fertilizer
6 - Sprayers
7 - Harvesters
9 - Forage harvester
10 - Irrigation
14 - Special Crops
17 - Sensor System
Bit Resolution: 1
211 - Last Bale Flakes per Bale View details | Request changes
Definition: The number of flakes in the most recently produced bale.
Unit Symbol: #
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
212 - Last Bale Average Moisture View details | Request changes
Definition: The average moisture in the most recently produced bale.
Unit Symbol: ppm
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
213 - Last Bale Average Strokes per Flake View details | Request changes
Definition: The number of baler plunger compression strokes per flake that has entered the bale compression chamber. This value is the average valid for the most recently produced bale.
Unit Symbol: #
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
214 - Lifetime Bale Count View details | Request changes
Definition: The number of bales produced by a machine over its entire lifetime. This DDE value can not be set through the process data interface but can be requested and added to a datalog. This DDE value is not affected by a task based total bales but will increment at the same rate as the task based total.
Unit Symbol: #
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
215 - Lifetime Working Hours View details | Request changes
Definition: The number of working hours of a device element over its entire lifetime. This DDE value can not be set through the process data interface but can be requested and added to a datalog.
Unit Symbol: h
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
Bit Resolution: 0,05
216 - Actual Bale Hydraulic Pressure View details | Request changes
Definition: The actual value of the hydraulic pressure applied to the sides of the bale in the bale compression chamber.
Unit Symbol: Pa
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
217 - Last Bale Average Hydraulic Pressure View details | Request changes
Definition: The average actual value of the hydraulic pressure applied to the sides of the bale in the bale compression chamber. This average is calculated over the most recently produced bale.
Unit Symbol: Pa
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
218 - Setpoint Bale Compression Plunger Load View details | Request changes
Definition: The setpoint bale compression plunger load expressed as percentage
Unit Symbol: ppm
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
219 - Actual Bale Compression Plunger Load View details | Request changes
Definition: The actual bale compression plunger load expressed as percentage.
Unit Symbol: ppm
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
220 - Last Bale Average Bale Compression Plunger Load View details | Request changes
Definition: The average bale compression plunger load for the most recently produced bale expressed as percentage.
Unit Symbol: ppm
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
221 - Last Bale Applied Preservative View details | Request changes
Definition: The total preservative applied to the most recently produced bale.
Unit Symbol: ml
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
222 - Last Bale Tag Number View details | Request changes
Definition: The Last Bale Tag Number as a decimal number in the range of 0 to 2147483647. Note that the value of this DDI has the limitation of being an signed 32 bit number.
Unit Symbol: n.a.
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
223 - Last Bale Mass View details | Request changes
Definition: The mass of the bale that has most recently been produced.
Unit Symbol: g
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
224 - Delta T View details | Request changes
Definition: The difference between dry bulb temperature and wet bulb temperature measured by a weather station in a treated field or on the application equipment.
Unit Symbol: mK
Typically used by Device Class(es): 5 - Fertilizer
6 - Sprayers
7 - Harvesters
9 - Forage harvester
17 - Sensor System
Bit Resolution: 1
225 - Setpoint Working Length View details | Request changes
Definition: Setpoint Working Length of Device Element.
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
Bit Resolution: 1
226 - Actual Working Length View details | Request changes
Definition: Actual Working Length of a Device Element.
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
Bit Resolution: 1
227 - Minimum Working Length View details | Request changes
Definition: Minimum Working Length of Device Element.
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
Bit Resolution: 1
228 - Maximum Working Length View details | Request changes
Definition: Maximum Working Length of Device Element.
Unit Symbol: mm
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
Bit Resolution: 1
229 - Actual Net Weight View details | Request changes
Definition: Actual Net Weight value specified as mass
Unit Symbol: g
Typically used by Device Class(es): 11 - Transport / Trailers
17 - Sensor System
Bit Resolution: 1
230 - Net Weight State View details | Request changes
Definition: Net Weight State, 2 bits defined as: 00 = unstable measurement 01 = stable measurement 10 = error (measuring error)
Unit Symbol: n.a.
Typically used by Device Class(es): 11 - Transport / Trailers
17 - Sensor System
Bit Resolution: 1
231 - Setpoint Net Weight View details | Request changes
Definition: Setpoint Net Weight value.
Unit Symbol: g
Typically used by Device Class(es): 11 - Transport / Trailers
17 - Sensor System
Bit Resolution: 1
232 - Actual Gross Weight View details | Request changes
Definition: Actual Gross Weight value specified as mass
Unit Symbol: g
Typically used by Device Class(es): 11 - Transport / Trailers
17 - Sensor System
Bit Resolution: 1
233 - Gross Weight State View details | Request changes
Definition: Gross Weight State, 2 bits defined as: 00 = unstable measurement 01 = stable measurement 10 = error (measuring error)
Unit Symbol: n.a.
Typically used by Device Class(es): 11 - Transport / Trailers
17 - Sensor System
Bit Resolution: 1
234 - Minimum Gross Weight View details | Request changes
Definition: Minimum Gross Weight specified as mass.
Unit Symbol: g
Typically used by Device Class(es): 11 - Transport / Trailers
17 - Sensor System
Bit Resolution: 1
235 - Maximum Gross Weight View details | Request changes
Definition: Maximum Gross Weight specified as mass.
Unit Symbol: g
Typically used by Device Class(es): 11 - Transport / Trailers
17 - Sensor System
Bit Resolution: 1
236 - Thresher Engagement Total Time View details | Request changes
Definition: Accumulated time while the threshing mechanism is engaged
Unit Symbol: s
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
237 - Actual Header Working Height Status View details | Request changes
Definition: Actual status of the header being above or below the threshold height for the in-work state. 2 bit status indicator: 00=disabled/off/above threshold height 01=enabled/on/below threshold height 10=error 11=undefined/not installed
Unit Symbol: n.a.
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
238 - Actual Header Rotational Speed Status View details | Request changes
Definition: Actual status of the header rotational speed being above or below the threshold for in-work state. 2 bit status indicator: 00=disabled/off/below threshold speed 01=enabled/on/above threshold speed 10=error 11=undefined/not installed
Unit Symbol: n.a.
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
239 - Yield Hold Status View details | Request changes
Definition: Status indicator for the yield measurement system. When enabled/on, the measurements from the yield measurement system are ignored and the yield is held constant. 2 bit status indicator: 00=disabled/off 01=enabled/on 10=error 11=undefined/not installed
Unit Symbol: n.a.
Typically used by Device Class(es): 6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
240 - Actual (Un)Loading System Status View details | Request changes
Definition: Actual status of the Unloading and/or Loading system. This DDE covers both Unloading and Loading of the device element wherein it is listed. Bits that are not mentioned are reserved and shall be set to 1. Byte 1: 2 bit unloading status indicator, bit 1 and 2: 00=disabled/off 01=enabled/on/unloading 10=error 11=undefined/not installed Byte 2: 2 bit loading status indicator, bit 1 and 2: 00=disabled/off 01=enabled/on/loading 10=error 11=undefined/not installed Byte 3: set to FF Byte 4: set to FF
Unit Symbol: n.a.
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
241 - Crop Temperature View details | Request changes
Definition: Temperature of harvested crop
Unit Symbol: mK
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
242 - Setpoint Sieve Clearance View details | Request changes
Definition: Setpoint separation distance between Sieve elements
Unit Symbol: mm
Typically used by Device Class(es): 6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
243 - Actual Sieve Clearance View details | Request changes
Definition: Actual separation distance between Sieve elements
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
244 - Minimum Sieve Clearance View details | Request changes
Definition: Minimal separation distance between Sieve elements
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
245 - Maximum Sieve Clearance View details | Request changes
Definition: Maximum separation distance between Sieve elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
246 - Setpoint Chaffer Clearance View details | Request changes
Definition: Setpoint separation distance between Chaffer elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
247 - Actual Chaffer Clearance View details | Request changes
Definition: Actual separation distance between Chaffer elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
248 - Minimum Chaffer Clearance View details | Request changes
Definition: Minimum separation distance between Chaffer elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
249 - Maximum Chaffer Clearance View details | Request changes
Definition: Maximum separation distance between Chaffer elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
250 - Setpoint Concave Clearance View details | Request changes
Definition: Setpoint separation distance between Concave elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
251 - Actual Concave Clearance View details | Request changes
Definition: Actual separation distance between Concave elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
252 - Minimum Concave Clearance View details | Request changes
Definition: Minimum separation distance between Concave elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
253 - Maximum Concave Clearance View details | Request changes
Definition: Maximum separation distance between Concave elements.
Unit Symbol: mm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
254 - Setpoint Separation Fan Rotational Speed View details | Request changes
Definition: Setpoint rotational speed of the fan used for separating product material from non product material.
Unit Symbol: /s
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 0,001
255 - Actual Separation Fan Rotational Speed View details | Request changes
Definition: Actual rotational speed of the fan used for separating product material from non product material.
Unit Symbol: /s
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 0,001
256 - Minimum Separation Fan Rotational Speed View details | Request changes
Definition: Minimum rotational speed of the fan used for separating product material from non product material.
Unit Symbol: /s
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 0,001
257 - Maximum Separation Fan Rotational Speed View details | Request changes
Definition: Maximum rotational speed of the fan used for separating product material from non product material.
Unit Symbol: /s
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 0,001
258 - Hydraulic Oil Temperature View details | Request changes
Definition: Temperature of fluid in the hydraulic system.
Unit Symbol: mK
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
Bit Resolution: 1
259 - Yield Lag Ignore Time View details | Request changes
Definition: Amount of time to ignore yield data, starting at the transition from the in-work to the out-of-work state. During this time, the yield sensor provides inconsistent or unreliable crop flow data.
Unit Symbol: ms
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
260 - Yield Lead Ignore Time View details | Request changes
Definition: Amount of time to ignore yield data, starting at the transition from the out-of-work to the in-work state. During this time, the yield sensor provides inconsistent or unreliable crop flow data.
Unit Symbol: ms
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
261 - Average Yield Mass Per Time View details | Request changes
Definition: Average Yield expressed as mass per unit time, not corrected for the reference moisture percentage DDI 184. This value is the average for a Task and may be reported as a total.
Unit Symbol: mg/s
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
262 - Average Crop Moisture View details | Request changes
Definition: Average Moisture of the harvested crop. This value is the average for a Task and may be reported as a total.
Unit Symbol: ppm
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
263 - Average Yield Mass Per Area View details | Request changes
Definition: Average Yield expressed as mass per unit area, not corrected for the reference moisture percentage DDI 184. This value is the average for a Task and may be reported as a total.
Unit Symbol: mg/m²
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
264 - Connector Pivot X-Offset View details | Request changes
Definition: X direction offset of a connector pivot point relative to DRP. This DDE shall be only attached to a DET element of type connector.
Unit Symbol: mm
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
Bit Resolution: 1
265 - Remaining Area View details | Request changes
Definition: Remaining Area of a field, which is calculated from the total area and the processed area.
Unit Symbol: m²
Typically used by Device Class(es): - Not Assigned
0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
17 - Sensor System
Bit Resolution: 1
266 - Lifetime Application Total Mass View details | Request changes
Definition: Entire Application Total Mass of the device lifetime.
Unit Symbol: kg
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
Bit Resolution: 1
267 - Lifetime Application Total Count View details | Request changes
Definition: Entire Application Total Count of the device lifetime.
Unit Symbol: #
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
Bit Resolution: 1
268 - Lifetime Yield Total Volume View details | Request changes
Definition: Entire Yield Total Volume of the device lifetime.
Unit Symbol: L
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
269 - Lifetime Yield Total Mass View details | Request changes
Definition: Entire Yield Total Mass of the device lifetime.
Unit Symbol: kg
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
270 - Lifetime Yield Total Count View details | Request changes
Definition: Entire Yield Total Count of the device lifetime.
Unit Symbol: #
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
271 - Lifetime Total Area View details | Request changes
Definition: Entire Total Area of the device lifetime.
Unit Symbol: m²
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
15 - Municipal Work
Bit Resolution: 1
272 - Lifetime Effective Total Distance View details | Request changes
Definition: Entire Total Distance of the device lifetime in working position.
Unit Symbol: m
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
Bit Resolution: 1
273 - Lifetime Ineffective Total Distance View details | Request changes
Definition: Entire Ineffective Total Distance of the device lifetime out of working position.
Unit Symbol: m
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
Bit Resolution: 1
274 - Lifetime Effective Total Time View details | Request changes
Definition: Entire Effective Total Time of the device lifetime.
Unit Symbol: s
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
Bit Resolution: 1
275 - Lifetime Ineffective Total Time View details | Request changes
Definition: Entire Ineffective Total Time of the device lifetime.
Unit Symbol: s
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
17 - Sensor System
Bit Resolution: 1
276 - Lifetime Fuel Consumption View details | Request changes
Definition: Entire Fuel Consumption of the device lifetime.
Unit Symbol: L
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
Bit Resolution: 0,5
277 - Lifetime Average Fuel Consumption per Time View details | Request changes
Definition: Entire Average Fuel Consumption per Time of the device lifetime.
Unit Symbol: mm³/s
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
Bit Resolution: 1
278 - Lifetime Average Fuel Consumption per Area View details | Request changes
Definition: Entire Average Fuel Consumption per Area of the device lifetime.
Unit Symbol: mm³/m²
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
11 - Transport / Trailers
12 - Farmyard Work
13 - Powered Auxilary Units
14 - Special Crops
15 - Municipal Work
Bit Resolution: 1
279 - Lifetime Yield Total Dry Mass View details | Request changes
Definition: Entire Yield Total Dry Mass of the device lifetime.
Unit Symbol: kg
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
280 - Lifetime Yield Total Seed Cotton Mass View details | Request changes
Definition: Entire Yield Total Seed Cotton Mass of the device lifetime.
Unit Symbol: kg
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
Bit Resolution: 1
281 - Lifetime Yield Total Lint Cotton Mass View details | Request changes
Definition: Entire Yield Total Lint Cotton Mass of the device lifetime.
Unit Symbol: kg
Typically used by Device Class(es): 7 - Harvesters
14 - Special Crops
Bit Resolution: 1
282 - Lifetime Threshing Engagement Total Time View details | Request changes
Definition: Entire Threshing Engagement Total Time of the device lifetime.
Unit Symbol: s
Typically used by Device Class(es): 7 - Harvesters
8 - Root Harvester
9 - Forage harvester
14 - Special Crops
Bit Resolution: 1
283 - Precut Total Count View details | Request changes
Definition: The total number of pre-cutted product units produced by a device during an operation.
Unit Symbol: #
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
284 - Uncut Total Count View details | Request changes
Definition: The total number of un-cutted product units produced by a device during an operation.
Unit Symbol: #
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
285 - Lifetime Precut Total Count View details | Request changes
Definition: Entire Precut Total Count of the device lifetime.
Unit Symbol: #
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
286 - Lifetime Uncut Total Count View details | Request changes
Definition: Entire Uncut Total Count of the device lifetime.
Unit Symbol: #
Typically used by Device Class(es): 7 - Harvesters
9 - Forage harvester
Bit Resolution: 1
287 - Setpoint Prescription Mode View details | Request changes
Definition: This DDE defines the source of the Task Controller set point value sent to the Control Function. This DDI shall be defined as DPD in the DDOP and needs to be setable. The TC shall then set this DDI before starting a prescription operation. The WS (Working Set) shall set this value to zero (0) after system start.
Unit Symbol: n.a.
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
Bit Resolution: 1
288 - Actual Prescription Mode View details | Request changes
Definition: This DDE defines the actual source of the set point value used by the Control Function. This DDI shall be defined as DPD in the DDOP and shall not be setable and need to support the on change trigger. The TC should request this DDI in case of an active prescription operation for documentation purpose.
Unit Symbol: n.a.
Typically used by Device Class(es): 4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
Bit Resolution: 1
289 - Setpoint Work State View details | Request changes
Definition: The Setpoint Work State DDI is the control command counterparts to the Work State DDI (141). The separation of the control commands through one DDI from the actual state communicated through another DDI enables verification of the transmission of the control commands independent from the effectuation of the requested control action.
Unit Symbol: n.a.
Typically used by Device Class(es): 0 - Non-specific system
1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
290 - Setpoint Condensed Work State (1-16) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 1 to 16 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
291 - Setpoint Condensed Work State (17-32) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 17 to 32 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
292 - Setpoint Condensed Work State (33-48) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 33 to 48 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
293 - Setpoint Condensed Work State (49-64) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 49 to 64 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
294 - Setpoint Condensed Work State (65-80) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 65 to 80 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
295 - Setpoint Condensed Work State (81-96) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 81 to 96 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
296 - Setpoint Condensed Work State (97-112) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 97 to 112 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
297 - Setpoint Condensed Work State (113-128) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 113 to 128 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
298 - Setpoint Condensed Work State (129-144) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 129 to 144 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
299 - Setpoint Condensed Work State (145-160) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 145 to 160 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
300 - Setpoint Condensed Work State (161-176) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 161 to 176 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
301 - Setpoint Condensed Work State (177-192) View details | Request changes
Definition: The Setpoint Condensed Work State DDIs are the control command counterparts to the Condensed Work States DDIs (161 – 176). The value is a combination of the setpoint work states of individual sections or units (e.g. nozzles) number 177 to 192 into a single setpoint work state of their parent device element. The setpoint condensed work state contains the child element setpoint work states, in the driving direction from left to right, where the leftmost child element setpoint work state are the 2 lowest significant bits of the Process Data Value. Each child device elements setpoint work state is represented by 2 bits and defined as: 00 = disable/off, 01 = enable/on, 10 = error indicator, 11 = no change. In total 16 child device element setpoint work states can be contained in one setpoint condensed work state of their parent device element. If less than 16 child device element setpoint work states are available, then the unused bits shall be set to value 11 (no change). When the parent device element contains the Setpoint Condensed Work State DDE, then the device descriptor shall not contain the individual setpoint work state DDEs in the child device elements.
Unit Symbol: n.a.
Typically used by Device Class(es): 1 - Tractor
2 - Primary Soil Tillage
3 - Secondary Soil Tillage
4 - Planters /Seeders
5 - Fertilizer
6 - Sprayers
7 - Harvesters
8 - Root Harvester
9 - Forage harvester
10 - Irrigation
14 - Special Crops
Bit Resolution: 1
Go to page: